Jump to content
SAU Community

Recommended Posts

Hey all,

So I bought some AD08's a few months back new and fitted them to my r34, only to realise that after that I bought 40 profiles not 35 profiles. I needed tyres for rego so I mounted them and drove around for 250 odd kms.

sooo long story short I bought another pair in the correct size as im a picky bastard and looking to move these on.

Asking $300 for the pair. Considering they have done 300kms its a pretty sweet deal and they are hard to find lately and its more than half price.

Size for those that cant read is 255/40/18

Happy to ship them anywhere in Aus with e-go for $20.

Pickup is in Penrith NSW

Contact via PM, can exchange phone numbers etc then :D

Dave

Pics

1wPUA2E.jpg

E1a9NFZ.jpg

ELxe3Nh.jpg

Link to comment
https://www.sau.com.au/forums/topic/455009-2554018-yokohama-ad08-pair/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
×
×
  • Create New...