Jump to content
SAU Community

32 Gtr N1 Side Skirts.

allgtr32
 Share

Recommended Posts

GH05T Grand Master

GH05T

Posted
Posted

allgtr, realistically the last pair that came up for sale which was not that long ago solf i think for about $800 and sold in about 5 mins so be prepared to wait and pay.
i have a set on my gtr and tbh for the right money i would take them off and just run a aftermarket set as my cars a daily and probably dosnt fully deserve a set, but the money would need to be good to bastardize my car as im lucky enough to have a full genuine N1 set of body parts.

Wongy Proficient

Wongy

Posted
Posted

I bought that pair that lasted 5 min :P, oh look, another set. Iam missing the rear spats though, that go after the wheel =\

http://www.sau.com.au/forums/topic/455310-n1-side-skirts/

Wongy Proficient

Wongy

Posted
Posted

Thats all you need, the front piece is still the same as stock. So the front piece shouldn't be under N1, should be normal part which i'd imagine would still be available

slowridn73 Enthusiast

slowridn73

Posted
Posted

The fronts are listed under both because they are they same, however they are still no longer available from nissan. Regardless, even if you only want the middle and rear pieces you will only be able to purchase 3/4 of the set, and finding just last piece used would most likely be more difficult that finding an entire set.

Also food for thought, we I asked about the availability they gave me the price as well... About 250000yen. That's about 2100$ U.S. Although that would have included the fronts which as you stated aren't required if you've still got your own.

RBN1 Mentor

RBN1

Posted
Posted

I bought that pair that lasted 5 min :P, oh look, another set. Iam missing the rear spats though, that go after the wheel =\

http://www.sau.com.au/forums/topic/455310-n1-side-skirts/

The Nismo rear pods? Good luck with that. One of the rarest body parts for a BNR32 :)

I have FRP copies from Japan and they cost $360 delivered!

They're for sale though as I managed to buy a genuine rubber set (after having to sell myself on a street corner for a week)

luke gtr Grand Master

luke gtr

Posted
Posted

The Nismo rear pods? Good luck with that. One of the rarest body parts for a BNR32 :)

I have FRP copies from Japan and they cost $360 delivered!

They're for sale though as I managed to buy a genuine rubber set (after having to sell myself on a street corner for a week)

any links or more about the frp reps?

I have genuine, but want a spare set for if i ever need them.

GTR-N1 Grand Master

GTR-N1

Posted
Posted

Wow, Thanks for the info :) gl to the buyer, the set that was SAU just sold this morning.

I was going to try the GReddy Gracer Nathan and I saw the N1s f/s a fraction earlier. I'm happy you swayed me across.

  • Like 1
  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      Who has a Infiniti Q60, Q50 (V37)?

      By Duncan · Posted

      The ATTESSA is functionally identical to R34; there were a bunch of JDM models that continued ATTESSA including Fuga/Q70, Skyline/Q50, Cima etc as an option. All with Auto only and I think mostly for snow regions. AFAIK there were no AWD VR30DDTT sold in Australia - it is on my to do list to check regs for racing a LHD car in Targa/ATR/AASA/CAMS events because if I can get the auto to work it would be interesting to run a 4wd car The Ecuteck TCM tuning is the same model as their ECU tuning, they already have it for R35 and Dose's favourite, BMW. You buy "points" to allow your computer to be tuned, buy either a bluetooth (phone app) or bluetooth+USB+Key (phone and PC) dongle, and pay for a tune that will be locked to your tuner ( ). You can also access the tuning software yourself but 1. it is mega expensive and 2. these computers have a billion parameters that intersect, so how could you ever spend enough time on it to get a decent result.
    • MBS206
      Who has a Infiniti Q60, Q50 (V37)?

      By MBS206 · Posted

      Or, is it a case of what it is like owning an R series Skyline? NFI what the previous owner has done or fiddled with... Ha ha ha After reading through this thread, I went on a bit of a research about the Q50/Q60. Now I'm quite intrigued by them! Is the AWD in them more like a WRX where it's always AWD, or is it more like the ATTESSA in the GTRs? By the sound of this TCU tuning, this sounds like a case of someone has made some real software for it, and you just need the right piece of hardware, and then you license that specific vehicle/TCU. Or is this a case of the software will be really expensive so only a few tuners have it, and you still have to pay a license per vehicle?
    • CF.Panda
      R34 25GT Engine Light 21

      By CF.Panda · Posted

      By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • joshuaho96
      R34 25GT Engine Light 21

      By joshuaho96 · Posted

      No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • brillo
      Leak from Tokico BM50 Brake Master Cylinder

      By brillo · Posted

      Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
×
×
  • Create New...