Jump to content
SAU Community

Recommended Posts

So they're getting old now, and some parts are becoming hard to find and will become harder as time goes by. If you're going to keep your older Nissan what parts should you start collecting while you can? Things like suspension, clutches, brakes etc are all readily available after market, but quarter windows, window trims, rubbers, etc need to be from Nissan or off another car if you can find one that isn't as shagged as the part you took off yours.

So, what is a good list of things to start collecting?

Link to comment
https://www.sau.com.au/forums/topic/455403-stockpiling-spares-32r/
Share on other sites

Well for the sake of conversation humour me and assume both are catered for. I think if you're selective and look out for second hand parts as well as new then it's may not be that bad.

The original question was what spares do you need to start accumulating that will dry up as time goes by. I'd guess a bonnet and front guards among many others. Also little bit's and bobs. Let's have

I wouldnt keep spare guards and bonnet 'just in case' I need them one day. They take up alot of room and may never be needed

Id stockpile gaskets and clips etc personally. I have a small collection of this stuff at the moment. Sensors and shit as well would be a good thing

Things that are likely to fail

At the moment its easy to get most parts you might need. I bought the clips for the reat seats and the harness + cap for the headlights of my r33 the other day relatively cheap

  • 4 weeks later...

I think that it really depends on how long you intend to keep the car.

I love my R33's and since I retired I have been collecting them to the point that I currently have a R33 GTR VSPEC, two Series II coupes, a Series II sedan and I have just acquired a C34 Series II Stagea (all registered).

From my experience with other cars you have to identify what components either fail on a regular basis or have a specific service life and identify a supply point for them. You also need to identify components that Nissan charge like a bull for (e.g. door rubbers at $1,000 per door) and stockpile good second hard parts to cover these components.

Aftermarket parts also become hard to come by as demand dries up and shops stop stocking these parts. Good buys are available when shops are selling up parts that have been on shelves for years and are not moving.

You also have to identify components that are model specific and not interchangeable across the entire model run (e.g. I have a spare v-spec diff).

The biggest issue then becomes storage. How much is enough and when is it too much? There are a lot of small parts that fail on a regular basis that are easy to keep spares of (e.g. electric window motors) but drivetrain, seats, panels and spare shells take up a lot of space.

I have at least one for just about every R33 component both 2wd and AWD with a collection of most body panels both new in boxes from Nissan and good quality spares plus a few shells for other structural parts.

For some reason my family think that I have an obsession with my R33's - please tell me it is not so.

Definitely an obsession happening there, go for it.

But you're correct, storage is the problem.

As mentioned, body panels are hopeless to store and there's always the danger something will fall on them. Best place for body panel is on a car. In fact best place for everything is on a car.

But door rubbers etc are already at insane prices and will become more so in future. Not an easy item to store properly in the hope it's not going to disintegrate once you open the packet.

Imagine paying around $1000 for a 32 dash only find 10 years down the track it's developed bubbles in your storage, would not be happy.

I'm concentrating on the expensive plastic interior bits as very few 2nd hand will still have all their tabs.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It would be well worth deciding where you want to go and what you care about. Reliability of everything in a 34 drops MASSIVELY above the 300kw mark. Keeping everything going great at beyond that value will cost ten times the $. Clutches become shit, gearboxes (and engines/bottom ends) become consumable, traction becomes crap. The good news is looking legalish/actually being legal is slighly under the 300kw mark. I would make the assumption you want to ditch the stock plenum too and want to go a front facing unit of some description due to the cross flow. Do the bends on a return flow hurt? Not really. A couple of bends do make a difference but not nearly as much in a forced induction situation. Add 1psi of boost to overcome it. Nobody has ever gone and done a track session monitoring IAT then done a different session on a different intercooler and monitored IAT to see the difference here. All of the benefits here are likely in the "My engine is a forged consumable that I drive once a year because it needs a rebuild every year which takes 9 months of the year to complete" territory. It would be well worth deciding where you want to go and what you care about with this car.
    • By "reverse flow", do you mean "return flow"? Being the IC having a return pipe back behind the bumper reo, or similar? If so... I am currently making ~250 rwkW on a Neo at ~17-18 psi. With a return flow. There's nothing to indicate that it is costing me a lot of power at this level, and I would be surprised if I could not push it harder. True, I have not measured pressure drop across it or IAT changes, but the car does not seem upset about it in any way. I won't be bothering to look into it unless it starts giving trouble or doesn't respond to boost increases when I next put it on the dyno. FWIW, it was tuned with the boost controller off, so achieving ~15-16 psi on the wastegate spring alone, and it is noticeably quicker with the boost controller on and yielding a couple of extra pounds. Hence why I think it is doing OK. So, no, I would not arbitrarily say that return flows are restrictive. Yes, they are certainly restrictive if you're aiming for higher power levels. But I also think that the happy place for a street car is <300 rwkW anyway, so I'm not going to be aiming for power levels that would require me to change the inlet pipework. My car looks very stock, even though everything is different. The turbo and inlet pipes all look stock and run in the stock locations, The airbox looks stock (apart from the inlet being opened up). The turbo looks stock, because it's in the stock location, is the stock housings and can't really be seen anyway. It makes enough power to be good to drive, but won't raise eyebrows if I ever f**k up enough for the cops to lift the bonnet.
    • There is a guy who said he can weld me piping without having to cut chassis, maybe I do that ? Or do I just go reverse flow but isn’t reverse flow very limited once again? 
    • I haven’t yet cut the chassis, maybe I switch to a reverse flow. I’ve got the Intercooler mounted as I already had it but not cut yet. Might have to speak to an engineer 
    • Yes that’s another issue, I always have a front mount, plus will be turbo plus intake will big hasstle. I’ve been told if it looks stock they’re fine with it by a couple others who have done it ahahaha.    I know @Kinkstaah said the stock gtt airbox is limiting but I might just have to do that to avoid a defect so it atleast looks legit. Or an enclosed pod so it’s hidden away and feed air from the snorkel and below Intercooler holes like kinstaah mentioned. Hmm what to do 
×
×
  • Create New...