Jump to content
SAU Community

Recommended Posts

So they're getting old now, and some parts are becoming hard to find and will become harder as time goes by. If you're going to keep your older Nissan what parts should you start collecting while you can? Things like suspension, clutches, brakes etc are all readily available after market, but quarter windows, window trims, rubbers, etc need to be from Nissan or off another car if you can find one that isn't as shagged as the part you took off yours.

So, what is a good list of things to start collecting?

Link to comment
https://www.sau.com.au/forums/topic/455403-stockpiling-spares-32r/
Share on other sites

Well for the sake of conversation humour me and assume both are catered for. I think if you're selective and look out for second hand parts as well as new then it's may not be that bad.

The original question was what spares do you need to start accumulating that will dry up as time goes by. I'd guess a bonnet and front guards among many others. Also little bit's and bobs. Let's have

I wouldnt keep spare guards and bonnet 'just in case' I need them one day. They take up alot of room and may never be needed

Id stockpile gaskets and clips etc personally. I have a small collection of this stuff at the moment. Sensors and shit as well would be a good thing

Things that are likely to fail

At the moment its easy to get most parts you might need. I bought the clips for the reat seats and the harness + cap for the headlights of my r33 the other day relatively cheap

  • 4 weeks later...

I think that it really depends on how long you intend to keep the car.

I love my R33's and since I retired I have been collecting them to the point that I currently have a R33 GTR VSPEC, two Series II coupes, a Series II sedan and I have just acquired a C34 Series II Stagea (all registered).

From my experience with other cars you have to identify what components either fail on a regular basis or have a specific service life and identify a supply point for them. You also need to identify components that Nissan charge like a bull for (e.g. door rubbers at $1,000 per door) and stockpile good second hard parts to cover these components.

Aftermarket parts also become hard to come by as demand dries up and shops stop stocking these parts. Good buys are available when shops are selling up parts that have been on shelves for years and are not moving.

You also have to identify components that are model specific and not interchangeable across the entire model run (e.g. I have a spare v-spec diff).

The biggest issue then becomes storage. How much is enough and when is it too much? There are a lot of small parts that fail on a regular basis that are easy to keep spares of (e.g. electric window motors) but drivetrain, seats, panels and spare shells take up a lot of space.

I have at least one for just about every R33 component both 2wd and AWD with a collection of most body panels both new in boxes from Nissan and good quality spares plus a few shells for other structural parts.

For some reason my family think that I have an obsession with my R33's - please tell me it is not so.

Definitely an obsession happening there, go for it.

But you're correct, storage is the problem.

As mentioned, body panels are hopeless to store and there's always the danger something will fall on them. Best place for body panel is on a car. In fact best place for everything is on a car.

But door rubbers etc are already at insane prices and will become more so in future. Not an easy item to store properly in the hope it's not going to disintegrate once you open the packet.

Imagine paying around $1000 for a 32 dash only find 10 years down the track it's developed bubbles in your storage, would not be happy.

I'm concentrating on the expensive plastic interior bits as very few 2nd hand will still have all their tabs.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Skyline R33 Series 2 sedan tail lights in excellent condition. These are becoming harder to find, especially in this state.    BOTH SETS ARE IN FANTASTIC CONDITION (REFER TO PHOTOS)    ✅ No broken covers or cracks ✅ Lenses are in flawless condition ✅ All rear mounting lugs intact ✅ Comes complete as pictured ✅ Perfect for restoration, replacement, or upgrade   These lights are ready to go, no surprises just quality OEM parts.   These are definitely one of the better sets we have seen in a while. With minimal wear and tear they will come as you see. Bear in mind they are not brand new they are almost 30 years old now. To find them in this condition isn’t easy they can only be obtained on the second hand market.   Australia Wide Postage Available At Buyers Expense. Silver Set:$850 Grey Set:$850 PM Me for purchase or any other questions  IMG_2166.dng IMG_2165.dng IMG_2172.dng IMG_2173.dng IMG_2174.dng IMG_2179.dng IMG_2180.dng IMG_2260.dng IMG_2258.dng IMG_2259.dng IMG_2261.dng IMG_2266.dng IMG_2273.dng IMG_2274.dng IMG_2276.dng
    • Unsolicited advice? Keep the engine as close to stock as you can. Nothing wrong with adding some boost and making a little more power, but given where you are, you really don't want to try to make it into a monster. I can't imagine the roads are up to it, and the lack of locla support when it grenades will be a ball ache. FWIW, If there is a dyno around that you can access, then brand new injectors are a good idea, which will lead you to (at least) putting a Nistune in it, which will allow you to put an R35 AFM on it, all of which will make it possible to make it much much nicer to drive and live with.
    • List all of your mods. It sounds like an aftermarket ECU hitting rev limiter. Like a valet mode, or a cold rpm limiter? 
    • @Kapr Haha yeah thats the one. I missed that you had a built up engine, I wouldn't want to run it on there either then. It was good in my situation just to replace the original turbo on a stock engine. @MBS206Yep definitely not a replacement for anything name brand
    • You are selling this? I have never bought something from marketplace...i dont know if i trust that enough. And the price is little bit "too" good...
×
×
  • Create New...