Jump to content
SAU Community

[nsw] Epic Sunday Drive - Hungry Jacks Cabramatta Meet 7am 17/05/15

32GTRB

By 32GTRB,
in Events Archive

 Share

Recommended Posts

32GTRB Proficient

32GTRB

Posted
Posted

Organising a pretty decent drive with a few mates but thought i'd open it up here if people want to join. Should be a good days drive and there'll be a good mix of highway and twisty stuff.

Meet location: Hungry Jacks in Cabramatta - Sun 17/05/15

Time: 7:00am meet for 7:30am departure SHARP. We'll be on the road for a while (at this stage route is just under 5 hours, not including breaks) so we should be back at HJ in Cabra around 3pm.

Destination: exact route to be shared on the day, but we're heading south.

Notes: Please be on time and make sure you fill up before we depart. There's a BP right next door to the HJ and a Caltex a bit further down the road.

We'll be driving a fair bit so make sure you've gotten enough sleep lol. We won't be waiting for people once we set off, but we'll be stopping at a few points for food, fuel, photos and smoke breaks. I'll also share route with people on the day (i've created a facebook event for this).

I'm also a pretty crappy photographer so feel free to bring your own and take snaps of the day.

Cheers,

John

 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      I'm not quite understanding or I'm missing steps here, (I appreciate people are trying to inform my brain but I am of the dumb, especially today) - All I want to do is mount the male BSPT of the OEM sender into the system somewhere without it snapping the adapter via vibration. The Nissan sender has a male 1/8 BSPT output. The block has a (very destroyed) 1/8 NPT input. I'm not really sure how a lathe assists with that, and also don't know anybody with a lathe, nor specifically what I would want to buy. I'm not really sure how adding additional adapters creates a better, more leak proof resilient seal here.
    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      10 minutes on a lathe would be one way to achieve literally anything you want, too. (except for AN type stuff - just talking about M-F with BSP and NPT in any mix/combo).
    • Duncan
      Mistakes were made, my R34 Story

      By Duncan · Posted

      yeah, so "something" should be -4 AN....to a hose....to a -4AN to NPT fitting *edit* sorry, I surely have that backwards. The LS is from land of the free so it must be NPT at the block, and the Nissan sender is BSPT. But still, conceptually the same
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      Yea I mean I know it exists, but finding (specifically) female BSPT to male NPT (i.e, to plug a Nissan OEM sensor into a 'standard' NPT port) was truly difficult. I don't think I'll recreate the setup I had in the past unless it's (possibly?) advisable with a stronger T piece made of steel, but who knows if the aluminium threads in the block become the next weak point etc. Given it may need to be redrilled out and something tapped into it, it'll need to be Female BSPT to the something that ends uo coming out of the side of the block.
    • MBS206
      Neil's R33 Gts-t Build

      By MBS206 · Posted

      Sounds like a perfect time to harness up a couple of the dogs, show the horses what real power is about!
×
×
  • Create New...