Jump to content
SAU Community

Recommended Posts

Morning all!

Yeah Trev, this is possibly the worst carton of Sapporo I've ever had :(

Didn't take any pics of the ribs sorry but they got the thumbs up from all in attendance, she even went back for extra sauce because it was apparently that good! :woot:

Kirin lager in Japan is probably in my top 3. Over here its terrible. They don't do stubbies so it's usually a good giveaway its Aussie beer rebadged

Asahi is mainly brewed locally as well.

I'm fairly sure the Asahi and Sapporo cans are fully imported though.

those 500ml odd shaped sapporo cans were good so probably legit. havent tried asahi cans here, but they arent my favourite beer anyway so i wouldnt normally buy them. they are pretty exxy over there compared to most others... i dont know what all the fuss is about

its gets advertised absolutely everywhere...

ive asked over there about it and told by a couple that it wasnt their regular beer but for special occasions or if guests were coming over then it was kind of the right thing to do

Hmmm... interesting.

I think out of the 3 (Sapporo, Asahi and Kirin) Sapporo is generally my favourite but obviously when brewed and flown in overnight from Ja-pan.




  • Similar Content

  • Latest Posts

    • Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
    • I also used NP   That’s were it’s seems to be the best place to fit it? All schematic shows also that it’s should be referenced from the turbo housing. But idk, I do see high hp cars without any connection or anything to their turbos, so I really don’t know how they connect their things
    • I do have loctite 243 and 246 and a few more models. I could drill it now in place and make new threads for m12 and order an4 - m12 coupling and fit that to the turbo. Run a braided hose to the EBC which I could get a an4 to 1/8npt 
    • So M12 and sealant should be fine?    NPT ” because that’s what I had and what I could get atm. 
    • Wouldn’t touch par if they gave it to me. You need to ask how much power you’re looking to make and then add about 50% to it because that’s what you’ll end up making  The factory box says no more at about 350kw or so, the upgraded synchro boxes won’t handle much over 500kw for long and at that point you’re looking at an auto or dog engagement manual,  once you’ve gone dog engagement you may as well go sequential, they cost a little bit more but it’s worth it  also while you’re at it you should upgrade the transfer case with 10 friction plates 
×
×
  • Create New...