Jump to content
SAU Community

Recommended Posts

That looks awesome, only difference on mine is wouldnt need the maf. If you could give me a ball park figure (you can pm me, private message) or just post here as im sure[mention=143902]shoey85[/mention] and[mention=143051]manne[/mention] might also be keen?

It's like t-revs said I will have to have a look and measure the diameter and angles. Guessing or copying will not be the same on your car as mine is fully custom the maf will have too be accounted for and the pod filter and bracket might be different. More than happy to have a look and help you out for cost price on the bends and will weld it for zero. Nothing is as easy as it looks, it a skyline!
  • Like 2


Scared you'll be defected?

Spool noise with steel pipe is awesome!!


Already have 2-1/2" steel painted black no point changing the cooler is only 2-1/2" unless I upgrade the turbo which is miles away so nah all good.
2 minutes ago, t_revz said:


@manne

Whaddayareckon

Telstra and "Cheap" don't exactly go together, unfortunately. 
I've sold phones for nearly a decade now and honestly don't believe in "one phone to rule them all". 
Iphone 7's seem pretty decent,  but as always, sept/oct = new iphone. 
Add $15 if you want "Stay Connected" which is Telstra protection package for the phone (Replacement phone if anything happens to yours). 
 

https://www.telstra.com.au/mobile-phones/mobiles-on-a-plan/iphone/iphone-7

https://www.telstra.com.au/mobile-phones/mobiles-on-a-plan/iphone/iphone-7-plus

These are the current prices, Other thing to look into would be purchasing the phones Outright, and signing up on a BYO Phone plan. 

https://www.telstra.com.au/mobile-phones/plans-and-rates#byo

The benefit of this is that it's much cheaper per month and if something bad were to happen to either phone, you can still upgrade it to a Mobile Phone Plan and get a new phone. The downside is paying upfront for a phone.  

That's about all the information I can give you, the rest is you making a decision, and hopefully coming to see me so I can earn that $$ ;) 

  • Like 2
I wish my breathers were that short
20170425_160435.thumb.jpg.e0055488a3256867d8587f5553a0e0b0.jpg

The mandrel bent bends on the intake are awesomeness. My setup and exhaust are Frankensteins in comparison. Mandrel bent bends chopped on angles and welded are not a substitute for something that's been proven and engineered.
  • Like 1



  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...