Jump to content
SAU Community

Recommended Posts

I like Japanese stuff, Cusco and Kazama are always good.

I've been meaning to pick up the Cusco rear brace that goes on the back of the 33 strut towers just because it looks better than the top mounted one and matches the front. Without modifying the rear parcel shelf. I put some new rear alpine speakers in the back a few weeks ago and it was a hassle to remove just for speakers. Any thoughts/opinions on what would be the best? I would assume that the top would be the best for rigidity and strength to match the front and the rear for body rigidity? Love the look of the Cusco stuff.

I've been meaning to pick up the Cusco rear brace that goes on the back of the 33 strut towers just because it looks better than the top mounted one and matches the front. Without modifying the rear parcel shelf. I put some new rear alpine speakers in the back a few weeks ago and it was a hassle to remove just for speakers. Any thoughts/opinions on what would be the best? I would assume that the top would be the best for rigidity and strength to match the front and the rear for body rigidity? Love the look of the Cusco stuff.

Seems no one is too interested in car talk? I bought a sushi roll a few weeks ago and wished it was a t-bone steak or a t-box or a x-box?
14 hours ago, Beyond Blue R33 said:


I've been meaning to pick up the Cusco rear brace that goes on the back of the 33 strut towers just because it looks better than the top mounted one and matches the front. Without modifying the rear parcel shelf. I put some new rear alpine speakers in the back a few weeks ago and it was a hassle to remove just for speakers. Any thoughts/opinions on what would be the best? I would assume that the top would be the best for rigidity and strength to match the front and the rear for body rigidity? Love the look of the Cusco stuff.

I'm looking at either a Kansai or Autoselect brace for my front and what ever for the rear. Finally got around to rebuilding my front hubs/struts/brakes last night. Time to look into doing the rears

20 hours ago, Beyond Blue R33 said:


I've been meaning to pick up the Cusco rear brace that goes on the back of the 33 strut towers just because it looks better than the top mounted one and matches the front. Without modifying the rear parcel shelf. I put some new rear alpine speakers in the back a few weeks ago and it was a hassle to remove just for speakers. Any thoughts/opinions on what would be the best? I would assume that the top would be the best for rigidity and strength to match the front and the rear for body rigidity? Love the look of the Cusco stuff.

 

18 hours ago, Beyond Blue R33 said:


Seems no one is too interested in car talk? I bought a sushi roll a few weeks ago and wished it was a t-bone steak or a t-box or a x-box?

Lol, these were posted 2 hours between each other?

Haven't had much personal experience with rear tower braces an a 33, can't imagine you're going to notice much of a difference between the 2 styles. Which ever one is easier to fit/will work for you.

On 5/20/2017 at 10:19 PM, Beyond Blue R33 said:


We have m.s.t. and s.s.t. at work it's 101.6 mm o/d (4") and 1.6 mm or 16# thick (for exhaust systems) 70mm would be 2 3/4" o/d. And the same thickness. Most stuff to do with heating and flues is 304 s/s 0.7mm thick because of its heat transfer properties. We sell it by the metre in s/s and m/s at work (the 16#) If you know what you want and let me know will be cost price:-) or Jarrahdale heating and cooling or perhaps kounis metal industries have the crimped lapped and swaged 0.7mm at God only knows what price. Will post a pic of the 0.7 crimped and swaged from my heater.

suprisingly, 100mm zincalume downpipe is not cheap from stratco. 

 

$75 for 2.4m

  • Like 1

@z00key  if you dont mind can you check out what these are worth. thanks

Beko DIN38450 14 Place Setting Fully Integrated Dishwasher

Model: 837624  SKU: 837624

Asko D5536FI Fully Integrated Dishwasher

Model: D5536FI SKU: 721345 

Asko D5546FI Fully Integrated Dishwasher with Cutlery FlexiTray

Model: D5546FI  SKU: 721346

suprisingly, 100mm zincalume downpipe is not cheap from stratco. 
 
$75 for 2.4m

I will get you a price on a 3m 4" o/d length m/s and s/s from work which would be 16#. but would assume even at cost price would be expensive. I only build the stuff so have no idea on pricing. The price is saved by using the thinner guage material (0.7ish) and having the proper forming machienes like stratco. Loads of heater shops will carry it in the 0.7mm s/s but like stratco at a profit. I was going to use some 5" 16# tube a few years ago or same stormwater pipe filled with concrete so I could paint it with with marble paint look for AWSEMONESS on my gazebo but just got 100mm square posts sanded them back and stained them in Japan black because was going to cost a fortune in steel or pipe and concrete?
34 minutes ago, Beyond Blue R33 said:


I will get you a price on a 3m 4" o/d length m/s and s/s from work which would be 16#. but would assume even at cost price would be expensive. I only build the stuff so have no idea on pricing. The price is saved by using the thinner guage material (0.7ish) and having the proper forming machienes like stratco. Loads of heater shops will carry it in the 0.7mm s/s but like stratco at a profit. I was going to use some 5" 16# tube a few years ago or same stormwater pipe filled with concrete so I could paint it with with marble paint look for AWSEMONESS on my gazebo but just got 100mm square posts sanded them back and stained them in Japan black because was going to cost a fortune in steel or pipe and concrete?

ill hunt around tomorrow for a better deal. surely someone selling the thin 0.7mm stuff has it cheaper than that. 

 

im also going to get the fire at its absolute max with heaps of small stuff and find out the absolute max temps im going to encounter so i know how much metal pipe i need before i can change to PVC. 

  • Like 1
ill hunt around tomorrow for a better deal. surely someone selling the thin 0.7mm stuff has it cheaper than that. 
 
im also going to get the fire at its absolute max with heaps of small stuff and find out the absolute max temps im going to encounter so i know how much metal pipe i need before i can change to PVC. 

Max it out. R+D. Your a animal!



  • Similar Content

  • Latest Posts

    • I hope it's actually possible. This is a write off in insurance world.
    • Yup. 2-way with shallow ramp angles. Still works.
    • That was the first session so not a lot to take from the day. It was low 20s ambient and the coolant had got to 110 (and obviously had some pressure!) so that still needs to be addressed. I haven't downloaded the data yet but will. I had refilled the auto trans with Redline DT6 because it claimed the best viscosity I could find at 100o. It wasn't really long enough to get a good feel for that; while the trans got to 100o in the session it still wasn't shifting crisply as I hoped. I think I'll try a few more sessions before judging. No steering motor overheat but I'd hope not in only 1 session! But finally the suspension; it was night and day over the standard stuff and the car was a couple of seconds quicker on the same crappy tyres, which is a huge difference. I'll stick with that and get some sway bars and a mechanical diff sorted too and see how that all goes together
    • I guess it’s partially a compromise of how my car is used, wanting to be able to switch from drift to grip with track side on-car adjustment. Also partially with the way the knuckles are set there is more static camber but less dynamic camber gain. 
    • OK, so update from the track day on Friday It was a classic "an unfortunate series of events'. There were a few cars around and when i checked my mirror coming out of the fish hook I notice some smoke from the rear of mine. Looked again and it was getting much worse, I figured I'd blown a turbo or something to got off it and pulled off the racing line. However.... since it is a left hairpin into a right kink, I was on the inside of the next corner. There was a car passing me on the left and a big drop off over the ripple strip on the right......and someone had knocked the witch's hat that was on the apex about 1m onto the track. So, between those 3, I decided to mow down the cone and not damage my car/the other car. Right choice, but surprising result.  The car decided the cone was a small pedestrian so it blew the rear bonnet hinges up to protect their head in the upcoming person to car impact....I didn't see that coming and like an airbag deployment it happened super fast. Straight into the pits from there, everything was driving fine but it became clear it was a coolant leak not smoke, it was billowing up onto the windscreen. Onto the trailer and home. I'll do a separate thread about the repair (once I work out what it is ), but the immediate problem was the bonnet wouldn't open because the front was pinched onto the front bar and would not release. Ultimately we unbolted the hinge from the bonnet, pulled it back a little and it released from the front OK. "There's your problem", the top radiator hose had popped off at the radiator.
×
×
  • Create New...