Jump to content
SAU Community

Recommended Posts

I like Japanese stuff, Cusco and Kazama are always good.

I've been meaning to pick up the Cusco rear brace that goes on the back of the 33 strut towers just because it looks better than the top mounted one and matches the front. Without modifying the rear parcel shelf. I put some new rear alpine speakers in the back a few weeks ago and it was a hassle to remove just for speakers. Any thoughts/opinions on what would be the best? I would assume that the top would be the best for rigidity and strength to match the front and the rear for body rigidity? Love the look of the Cusco stuff.

I've been meaning to pick up the Cusco rear brace that goes on the back of the 33 strut towers just because it looks better than the top mounted one and matches the front. Without modifying the rear parcel shelf. I put some new rear alpine speakers in the back a few weeks ago and it was a hassle to remove just for speakers. Any thoughts/opinions on what would be the best? I would assume that the top would be the best for rigidity and strength to match the front and the rear for body rigidity? Love the look of the Cusco stuff.

Seems no one is too interested in car talk? I bought a sushi roll a few weeks ago and wished it was a t-bone steak or a t-box or a x-box?
14 hours ago, Beyond Blue R33 said:


I've been meaning to pick up the Cusco rear brace that goes on the back of the 33 strut towers just because it looks better than the top mounted one and matches the front. Without modifying the rear parcel shelf. I put some new rear alpine speakers in the back a few weeks ago and it was a hassle to remove just for speakers. Any thoughts/opinions on what would be the best? I would assume that the top would be the best for rigidity and strength to match the front and the rear for body rigidity? Love the look of the Cusco stuff.

I'm looking at either a Kansai or Autoselect brace for my front and what ever for the rear. Finally got around to rebuilding my front hubs/struts/brakes last night. Time to look into doing the rears

20 hours ago, Beyond Blue R33 said:


I've been meaning to pick up the Cusco rear brace that goes on the back of the 33 strut towers just because it looks better than the top mounted one and matches the front. Without modifying the rear parcel shelf. I put some new rear alpine speakers in the back a few weeks ago and it was a hassle to remove just for speakers. Any thoughts/opinions on what would be the best? I would assume that the top would be the best for rigidity and strength to match the front and the rear for body rigidity? Love the look of the Cusco stuff.

 

18 hours ago, Beyond Blue R33 said:


Seems no one is too interested in car talk? I bought a sushi roll a few weeks ago and wished it was a t-bone steak or a t-box or a x-box?

Lol, these were posted 2 hours between each other?

Haven't had much personal experience with rear tower braces an a 33, can't imagine you're going to notice much of a difference between the 2 styles. Which ever one is easier to fit/will work for you.

On 5/20/2017 at 10:19 PM, Beyond Blue R33 said:


We have m.s.t. and s.s.t. at work it's 101.6 mm o/d (4") and 1.6 mm or 16# thick (for exhaust systems) 70mm would be 2 3/4" o/d. And the same thickness. Most stuff to do with heating and flues is 304 s/s 0.7mm thick because of its heat transfer properties. We sell it by the metre in s/s and m/s at work (the 16#) If you know what you want and let me know will be cost price:-) or Jarrahdale heating and cooling or perhaps kounis metal industries have the crimped lapped and swaged 0.7mm at God only knows what price. Will post a pic of the 0.7 crimped and swaged from my heater.

suprisingly, 100mm zincalume downpipe is not cheap from stratco. 

 

$75 for 2.4m

  • Like 1

@z00key  if you dont mind can you check out what these are worth. thanks

Beko DIN38450 14 Place Setting Fully Integrated Dishwasher

Model: 837624  SKU: 837624

Asko D5536FI Fully Integrated Dishwasher

Model: D5536FI SKU: 721345 

Asko D5546FI Fully Integrated Dishwasher with Cutlery FlexiTray

Model: D5546FI  SKU: 721346

suprisingly, 100mm zincalume downpipe is not cheap from stratco. 
 
$75 for 2.4m

I will get you a price on a 3m 4" o/d length m/s and s/s from work which would be 16#. but would assume even at cost price would be expensive. I only build the stuff so have no idea on pricing. The price is saved by using the thinner guage material (0.7ish) and having the proper forming machienes like stratco. Loads of heater shops will carry it in the 0.7mm s/s but like stratco at a profit. I was going to use some 5" 16# tube a few years ago or same stormwater pipe filled with concrete so I could paint it with with marble paint look for AWSEMONESS on my gazebo but just got 100mm square posts sanded them back and stained them in Japan black because was going to cost a fortune in steel or pipe and concrete?
34 minutes ago, Beyond Blue R33 said:


I will get you a price on a 3m 4" o/d length m/s and s/s from work which would be 16#. but would assume even at cost price would be expensive. I only build the stuff so have no idea on pricing. The price is saved by using the thinner guage material (0.7ish) and having the proper forming machienes like stratco. Loads of heater shops will carry it in the 0.7mm s/s but like stratco at a profit. I was going to use some 5" 16# tube a few years ago or same stormwater pipe filled with concrete so I could paint it with with marble paint look for AWSEMONESS on my gazebo but just got 100mm square posts sanded them back and stained them in Japan black because was going to cost a fortune in steel or pipe and concrete?

ill hunt around tomorrow for a better deal. surely someone selling the thin 0.7mm stuff has it cheaper than that. 

 

im also going to get the fire at its absolute max with heaps of small stuff and find out the absolute max temps im going to encounter so i know how much metal pipe i need before i can change to PVC. 

  • Like 1
ill hunt around tomorrow for a better deal. surely someone selling the thin 0.7mm stuff has it cheaper than that. 
 
im also going to get the fire at its absolute max with heaps of small stuff and find out the absolute max temps im going to encounter so i know how much metal pipe i need before i can change to PVC. 

Max it out. R+D. Your a animal!



  • Similar Content

  • Latest Posts

    • So stock ECU does not like anything above 10 psi?  That Nistune one is just for "try" if it will be any different, I know it need to be tune for that. I know but YOU may know about these problem but i/we dont. They few little Skylines here let alone people who know anything about tham so that is why iam asking here  
    • So now we have a radiator with no attachments whatsoever. It lifts up with a particularly tight spot between the drivers side air box mount and the lower radiator outlet, but if you've got this far you will sort that too. This is the lower mounts with the rad out so you can see where the rubber bushes go, it is a straight shot upwards Done! Assembly is the reverse of disassembly, with blood less likely to be shed.
    • Right, onto the second last trick. The Air Con condenser is mounted to the front of the radiator and stays in the car when the radiator is removed. There are 2x 10mm headed self tappers holding the top of the condenser to the radiator, remove those The bottom of the condenser is attached to the radiator with clips. You need to lift the condenser out of those clips and clear (up, then forward). f**ked if  could work out how to do that last bit with the front bumper on. I hope you can, and you share the trick.  Bumper removal probably deserves its own thread one day once I've recovered the will to live, but basically you need to remove the wheels, front inner guard liners (clips and 10mm headed bolts), the self tapper between the guard and the bumper at the rearmost point of the bumper (same as an R32 that bit), any remaining clips at the top/front of the grill, an absolute bastard design with a plate that holds the top of the bumper above the headlight each side (only 1 bolt which is tricky to get to, but the plate catches 2 places on the bumper and must be removed....carefully!) and push clips between the bumper and guard under the headlight. If you've done all that you will be faced with wiring for the fog lights on both sides and in ADM Q50 RS at least, 4 nasty tight plugs on the driver's side for the ADAS stuff. So, the clips at the bottom look like this on drivers side (looking from the front) And on the passenger side (also from the front), you can see this one is already out Clearance on both of these are super tight; the condenser needs to move up but the upper rad support mount prevents that, and the radiator can't move down far because it is (rubber) mounted. Once you achieve the impossible and drop the condenser off those mounts so it does not stop the rad moving, you are good to go
    • OK, next the shroud needs to come off and there are a couple of tricks. Firstly, there is a loom from near the passenger side headlight to the fans, coolant temp sensor etc and there is no plug to undo.  In my case I was OK to leave the shroud on top of the engine so I just undid the passenger side fan plug and about 10 of the clips which gave enough free wire to put it aside. The fan plugs were super tight, the trick I used was a small falt screwdriver to push down on the release tab, then a larger flat screwdriver to lever the plug out of the fan unit....be careful with how much force you apply! If you need to remove the shroud altogether for some reason you will have to deal with all the plugs (tight) and clips (brittle)....good luck. I removed all of the clips and replaced them with cable ties that I will just cut next time. Also, in the Red Sport / 400R at least, the intake heat exchanger reservoir hose is bolted to the shroud in 2 places with 10mm headed bolts; so remove them (the hose stays in the car; no need to undo it at the t fittings down at the radiator lower mount. Once you've dealt with the HX hose and the wiring loom, there are 3x 10mm headed self tappers holding the top of the shroud to the radiator; remove those.   The shroud then lifts out of the bottom mounts where it sits on the radiator, up and onto the engine out of the way. Simples
    • Ok, disregard my “rate them” comment, sorry for my unrealistic input
×
×
  • Create New...