Jump to content
SAU Community

Recommended Posts

yes it would have damaged the CAT beyond repair.
 
remove immediately and show us your flames
Opps mis print "use" not used

Was thinking of it as my full tank did not last long. 2 closed car run about 5 to 8 laps each. lost count left me 1/4 left n still wanted to go play :(
  • Like 1
yes it would have damaged the CAT beyond repair.
 
remove immediately and show us your flames
A 4"x6" piece of flaming metalic melted substrate on the porches windscreen would have definitely slowed it down.
  • Like 1
A 4"x6" piece of flaming metalic melted substrate on the porches windscreen would have definitely slowed it down.
I melted this 100cell 4" ceramic on 98ron. At 350whp. Replaced with 100cell 4" by 6" metallic. No probs so far. The entire substrate came loose, blocked the exhaust and she popped a intercooler hose, was scary, it was glowing that bad you could almost see through it when the police came to have a look. But that's another story. I got the oval as a free replacement. If your worried about the cat I would go the venom 3" to 5" steel substrate. They fully weld the substrate in and are a quality product. :-D DSC_0162_4.JPGDSC_0167_3(1).JPGDSC_0163_4(1)(1).JPGDSC_0167_3(1).JPGDSC_0182_1(1).JPG
  • Like 1
22 hours ago, pol1on1 said:

Got a question? Will it hurt if you used avgas 110 octane leaded fuel.

All i can think of is an unhappy cat

That porsche was mental fast!!!emoji2.pngIMG_1458.jpgIMG_1474.jpg

Everuthing would dislike the avgas! Epic fuel tho, just dont buy it from the stale rusty horrible tanks at barbs lol

4 hours ago, pol1on1 said:

Ahhh thats why they sell it cheap. emoji57.png

So racing fuel WA is the only good place ?

Pretty much unless u can get a license to import vp 109 race fuel ? or happen to know someone who qorks for shell at the airports ?

  • Like 1



  • Similar Content

  • Latest Posts

    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...