Jump to content
SAU Community

Recommended Posts

Hi guys & girls, I'm Carl & here's a story about a rare Nissan I have. The cars a 1989 Nissan F31 Leopard that my wife & I purchased about 5 years ago. After owning it for a few years & doing some cruising, it was time to sell to purchase another car. So the best thing I could do when selling it was to sell it to a good friend (Martin) that I knew would look after it & give it the love it needed.

So another couple of years past with the Leopard in Martin's hands. He had done some work on the car in the time he had it. Mainly servicing & general maintenance type stuff but he also managed to get the factory TV working with a new digital TV receiver. So after a couple of years Martin decided he didn't really need the old girl anymore & didn't really have the room to store it. Up for sale it went but being such a rare car most people liked it but seemed to be to scared to go through with purchasing it.

Now you know that feeling you get when a car you once owned comes up for sale & even worse when it's one of those cars you wish you never sold. I had that feeling, I also had the room but unfortunately not the funds. Thankfully Martin & I were able to sort out a deal which landed the Leopard back in my garage. Now unfortunately it needs a bit of work so it's parked up for while so I can sort out a few things.

Here's a little run down on the car. It's current mods & what I'd like to do in the future.

Car: 1989 Nissan F31 Leopard Ultima.

Engine: VG30DET, factory twin throttle bodies, single ceramic turbo, non-intercooled, quad cam 3.0L V6

Transmission: Factory 3 speed auto with overdrive.

Differential: R200 long nose, viscous LSD

Brakes: Single piston calipers front & rear, floating hub front, ventilated front brake rotors, solid rear brake rotors

Suspension: Front Macpherson strut front with DUET-SS "Super Sonic Suspension" (removed), rear is swing arm IRS

Upgrades: yellow jacket coil packs, R31 lowered King Springs, front Monroe GT strut inserts, rear Koni Red struts, HR31 Skyline Whiteline front sway bar, Nismo front strut brace, digital TV receiver running on the factory TV, Parrot Bluetooth receiver, 80's Recaro bucket seats, 18x9 front & 19x10 rear Work Eurolines.

Future Upgrades: Z31 5 stud conversion, R33 GTS25T brake upgrade front & rear, weld on HR31 coilovers, possible engine conversion.

post-33413-0-74117300-1432728029_thumb.jpg

post-33413-0-59095400-1432728054_thumb.jpg

post-33413-0-25552200-1432728117_thumb.jpg

post-33413-0-46100400-1432728140_thumb.jpg

  • Like 4

nice!

with Eurolines it looks a little bit VIP... (in a good way)

any details on the TV mods? im curious because may be a future project for mine. not that I watch TV or anything, but could be cool.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • How would you even adjust the clutch if the pedal already has the correct free play? The operating cylinder has no adjustment in mounting position or rod length. On pull style clutches there is also no ability to adjust the bearing carrier. Push type I can see how adjusting the carrier height makes it all work.   If this is the twin plate clutch did you verify that your friction disks were oriented correctly? It's not mentioned in the directions at all you just have to notice that one side the friction disks have a part number on the hub fingers and a subtle coning to those fingers. Another thing that I noticed was if you put the friction disks in backwards the pressure plate fingers will not be even and flat when the clutch is installed.
    • yeah, mechanically, it is probably do-able, off the top of my head, there would be the transfer case, which I believe will bolt up to the rear of the RWD transmission, the shorter rear tail shaft. A front drive shaft, front diff, engine upper sump, front drive shafts, front hubs and front AWD struts (they are shaped around the front drive shafts), LCAs (at the very least from the front suspension) oil cooler.  You might want the rear diff from an AWD too, so you can be certain the front and rear diff rations are identical.  Who knows what brackets and mounts you might need.  So a whole doner car might be the best option if you need to maintain RHD. Then actually making it work, that would be a whole different story.
    • Take the fall as a warning sign for future endeavours  Stay safe mate
    • hi mate, HKS cooler piping still available by any chance?
×
×
  • Create New...