Jump to content
SAU Community

Recommended Posts

garrett gtx3582 with polished front and ceramic coated rear and braided lines $1900

steam pipe manifold with ceramic coating $700

tail external gate and screamer pipe $220

ceramic coated dump pipe $100

tig welded 4" turbo intake pipe and pod filter $150

greddy oil catch can and braided lines $150

mscn oil cooler and braided lines $150

turbosmart supersonic bov and drivers side cooler pipe suit ffp must remove washer bottle to fit or cut pipe to suit $250

1000cc bosch injectors and aeroflow fuel rail $550

total = $4170

I will sell the lot for $3600

my phone is broken at the moment so email me on [email protected] or send enquiries to a close friends number

my name is Nigel but this number 0408 867 922 is my friends phone his name is grant please leave any questions or your contact number and ill get back to you as soon as possible.

turbo is mint no shaft play

steam pipe mani near new aswell the turbo and steam pipe mani both have new ceramic coating.

4" intake near new looks great fits perfect.

bov works great no issues.

injectors ran 98octane near new

Located western suburbs NSW

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...