Jump to content
SAU Community

Happy Laps - Queensland Raceway 19-09-15

Cadmoon

By Cadmoon,
in Events

 Share

Recommended Posts

Cadmoon Grand Master

Cadmoon

Posted
Posted
Event:
Happy Laps - Queensland Raceway
Description:
A chance to get out on track for a fun cruise and have some om nom noms! Bit of spirited driving is allowed but it is still an event on a race track so a few rules need to be followed (see below). Also if you have not done QR before this is your ticket in to Lakeside.
Location:
Queensland Raceway
Date:
Saturday the 19th of September.
Time:
7:00 AM Arrival
Cost:
Slight change in the payment form these happy laps onwards:
$35 for members and guests of members riding with a member
$50 for non members
Please note that this is a per person cost, any passengers etc are required to pay as well.
Requirements:
1. QR have a minimum age of 12 for passengers.
2. No overtaking in the first 2 laps.
3. The overtaking car is responsible for completing the overtaking move safely.
4. Overtaking is only permitted on straights, unless clearly waved passed by the car in front.
5. Overtaking move must be completed well before the end of the straight, and the car being overtaken must be given plenty of room.
6. Cars should not be more than 2 abreast at any point on the track.
7. Be aware of cars around you, in front and behind (and beside when being overtaken).
8. Do not assume that the car in front of you knows you are there.
QR RULES

10. There is to be no racing

11. The straights are speed limited to 120km/h

12. Any car that goes off the track will be pulled off

13. There is not to be more than 1 sec of tyre smoke.

14. There are to be no helmets

15. Vehicles must have current registration and number plates are not to be obscured in anyway

Payment Details:

Name: Skylines Australia Queensland Club

Bank: Westpac

BSB: 034 063

ACC: 354012

PAYMENT REFERENCE: Username&HappyLaps

Attendees:
  1. Cadmoon +1
pretX Collaborator

pretX

Posted
Posted

I'll be in. Need to test brembos and Sayc and ALL THE THINGS.

How is this going for numbers? Are JSpec or Evo owners clubs joining this time?

Can I float this to some of the guys over at ozvr4? Could help get the numbers up.

And lets face it, might be a lot of people's only chance to ever see more than 1 legnum in 1 place at any given time :P

Cadmoon Grand Master

Cadmoon

Posted
  • Author
Posted

I'll be in. Need to test brembos and Sayc and ALL THE THINGS. Including radiator hoses? :P

How is this going for numbers? Are JSpec or Evo owners clubs joining this time? Not a lot. No, they're not interested in joining us after a few non members who drive skylines stirred shit with them.

Can I float this to some of the guys over at ozvr4? Could help get the numbers up. Sure

And lets face it, might be a lot of people's only chance to ever see more than 1 legnum in 1 place at any given time :PBecause they're all broken?

pretX Collaborator

pretX

Posted
Posted

I'll be in. Need to test brembos and Sayc and ALL THE THINGS. Including radiator hoses? :P Yes, actually, all the hoses.

How is this going for numbers? Are JSpec or Evo owners clubs joining this time? Not a lot. No, they're not interested in joining us after a few non members who drive skylines stirred shit with them.

Can I float this to some of the guys over at ozvr4? Could help get the numbers up. Sure Awesome, I'll make sure they all bring spare radiator hoses...

  • Like 1
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Haggerty
      RB25DE NEO with Haltech ECU

      By Haggerty · Posted

      Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • brillo
      Leak from Tokico BM50 Brake Master Cylinder

      By brillo · Posted

      Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • MBS206
      Cas issue

      By MBS206 · Posted

      It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • nash47
      Cas issue

      By nash47 · Posted

      Yes sir am asking is there possible way from aem tuner from wiring pins 
    • MBS206
      Cas issue

      By MBS206 · Posted

      Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...