Jump to content
SAU Community

Recommended Posts

I have a new alcantara wheel and want to know what gloves might suit. Car is driven mostly on club sprint days and I'm not a massive fan of either the full blown logo'ed up 'race car driver' gloves or the Alan Partridge string back gloves look. I do not wear a race suit. I would consider them for the road as have darkest legal tint. So what choice for the gentleman racer?

Being serious I want grip comfort and to protect my beautiful wank wheel from wear.

Many thanks.

post-46395-14416226951716_thumb.jpg

Edited by LotusGTR
Link to comment
https://www.sau.com.au/forums/topic/459526-gloves/
Share on other sites

I used to spend 3 to 4 hours per day in the car driving from Wollongong to my offices in Liverpool, Parramatta, Ashfield and in town and would have to have skin cancers removed very year from my hands due to sun exposure. After having this done a few times I developed the need to always drive with gloves to protect my hands.

The trick is getting the compromise right between appearance, feel and suitability for the task - you do not always want to look like a boy racer. After using many set of gloves in many styles I have settled on two options.

Track work - I have a FIA approved set of Sparco gloves that have a nice soft feel and long cuffs that came down over my race suit.

Street driving - I use a Ironclad AGT glove that is available from Bunnings. It has a soft synthetic leather face and the backs are black elastic fabric that moulds to your hand and breathes.

Link to comment
https://www.sau.com.au/forums/topic/459526-gloves/#findComment-7599789
Share on other sites

Actually, got these but I'm still looking for a road solution. Been told the MG guys go for Dents gloves.....

Golf glove makes sense as grippy leather, soft, and designed to be tight across the palm with the hand clenched similar to the grip on a steering wheel. Will investigate further

Edited by LotusGTR
Link to comment
https://www.sau.com.au/forums/topic/459526-gloves/#findComment-7600216
Share on other sites

  • 2 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • If by axles you mean driveshafts, they're supposed to have play in them. They are not hard to recondition, it's just pulling apart the cv's, cleaning them and regreasing, fit new boots. I've only rebuilt one set and there was fk-all wear in them, still running just fine 8 years later.
    • Note, the aluminium bit that screws in the end that you have to remove to dismantle the rack is single use as it's punch-marked, it will strip when you unscrew it, and then you have to flatten the notch in the steel rack body, screw in a new aluminium end when rebuilding, then punch-mark it again once assembled. it is also 'somewhat tricky' to refit the rack>steering wheel linkage gear as it needs to be set to the right preloads etc. A rebuild is probably something that's better just given to a steering shop for a couple of hundred, unless you're mad-keen to do it yourself. 
    • Do you have the workshop Manuel? Sorry that's a Spanish waiter...I mean, manual? Some relevant pages>
    • How much have you lowered?  I had 350Z springs in the rear and was able to pull the camber into factory spec with the factory arms on the rear, obviously the front ran negative camber as it isn't adjustable, but rotating the wheels regularly evened out the wear.
×
×
  • Create New...