Jump to content
SAU Community

Recommended Posts

So I took my R34 n/a to the track for a day, the next day when I started it there was a loud squealing sound coming from the fan belt, I think it was the fan belt.

It only happens on a cold start, sometimes it'll start up straight away, other times i"ll have to turn to car on once or twice for it to go away. On idle and when driving I can hear a slight noise coming from the engine which was never there before.

The belt it pretty tight so I don't think it's a loose belt. I'll be taking it to the mechanic as soon as I can but if it's a simple fix I'd rather save my time.

Anyone have any ideas?

Thanks :)

Link to comment
https://www.sau.com.au/forums/topic/459647-squealing-sound-when-starting-car/
Share on other sites

The belt may be tight, but it may have been slipping whilst being thrashed at the track, which can result in the pulleys getting glazed. Makes them squealy under various circumstances (like cold starts, heavy loads from PA, alternator, whatever). Sometimes you need to rub the inside of the pulley sheaves with some sandpaper to clean them up. Sometimes all you need is a squirt of belt dressing.

If you want to test if it's the fanbelt, get someone ready with a squirt bottle ready to shoot the belt/pulley with water at the instant to start it up. If the squealing dies then it's the fanbelt. Otherwise it could be as described by Mike.

The belt may be tight, but it may have been slipping whilst being thrashed at the track, which can result in the pulleys getting glazed. Makes them squealy under various circumstances (like cold starts, heavy loads from PA, alternator, whatever). Sometimes you need to rub the inside of the pulley sheaves with some sandpaper to clean them up. Sometimes all you need is a squirt of belt dressing.

If you want to test if it's the fanbelt, get someone ready with a squirt bottle ready to shoot the belt/pulley with water at the instant to start it up. If the squealing dies then it's the fanbelt. Otherwise it could be as described by Mike.

Thanks for the suggestion, I'll give them a go and see what happens and report back :)

Is the noise high pitched? I used to get a noise on starting, it went away after I replaced the coil packs on my N/A R34.

Yeah it is pretty high pitched but when listening it does sound like it's coming from the belt. It hasn't happened in the past 24 hours and I've drove it a fair bit so I'm not sure. I'll wait and see if it happens again.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Swapped the injectors around and the misfire followed. I went ahead and ordered the Deatschwerks 550cc injectors and am currently waiting for them to be ship and arrive. In the meantime, I've had my Nistune soldered to the ECU. Tested it, and and tried it out with the software. Everything should be prepared for when the injectors arrive.  
    • Yeah they charge a little extra for mods , last year I noted no mods but I did have an exhaust fitted after that so  better to let them know cause these kinds of things can cause the policy to be void if you ever need to claim.
    • Hello, just just bought an 1999 enr34 with a stock rb25neo and I'm looking to upgrade the engine to 500whp I know some basic things but wondering if there are things I'll need to do to upgrade the stock block and all the bits and pieces to achieve this.
    • Thanks everyone for the replies and suggestions. Got the seats out (hoping I could find some existing grommets but no such luck). By tapping and measuring etc. I could figure out where I could drill through if needed. But first I borrowed an inspection camera and managed to go through factory holes in the chassis rail and could see that the captive nut was holding steady which is why it could retighten. So it was indeed a stripped section of thread, so I applied downforce by levering the bolt head with a screwdriver and went slowly back and forth until it came out. Camera helped a lot cos I could monitor that the captive nut was holding tight. Now I just have one very seized main subframe nut to tackle 😅
    • BOVs do have a purpose, if you ever log pressure before and after the throttle body, you will see a spike pre throttle on lift off from a WOT condition. Enough to bend throttle blades / damage e-throttle motors or simple assist in blowing off cooler pipes. FWIW, the above on really applies to those running at least 2 bar of boost. OP shouldn't have an issue, on the other hand, here are some videos of my shit box over a decade ago with some succulent dose with the airbox on and off. That shit box is unrecognisable these days 🫠    
×
×
  • Create New...