Jump to content
SAU Community

Id1300s/ Short Injectors To Neo Manifold.

Huzqld

By Huzqld,
in Engines & Forced Induction

 Share

Recommended Posts

Huzqld Enthusiast

Huzqld

Posted
Posted

Hi, got some id1300s for my neo, but am having trouble getting them to fit. See pic (Plug base fouls on the manifold).

I was going to just grind a bit off the manifold but too much needs to be taken out.

Has anyone fit these type of injectors to a normal rb25 or rb25neo manifold.

On my old injectors the plug was more to the top.

post-78438-0-49129300-1442307488_thumb.jpg

89CAL Grand Master

89CAL

Posted
Posted (edited)

They need spacers. These are pretty readily available. Those look like they are just the injector on its own. Pretty sure they need the smallest of the spacers, but top feed injectors in stock manifolds arent my forte

Scotty on here should be able to help you out. He will probably show up in this thread sooner or later

This is from a quick google search, bottom of the page. Click here

Edited by 89CAL
Huzqld Enthusiast

Huzqld

Posted
  • Author
Posted (edited)

Cheers mate,

I have the height adapters for them to make them full length but they and most spacers go on the top of the injector?

Which doesn't help with the issue I'm having

Spoke to Scotty today, i may have to get him to make some spacers to go under the injector if i cant find anything else

Edited by Huzqld
89CAL Grand Master

89CAL

Posted
Posted

Hmmmm I thought they made them for the bottom of the injector as well. But I may be wrong. They definently look shorter then my 1000cc's

I had a page with the pics of all the adapters etc attatched but cant find it. I may be talking complete rubbish though, Scott would know better then me

Dose Pipe Sutututu Grand Master

Dose Pipe Sutututu

Posted
Posted

on a non neo you are required to fit an injector boss, which is just a metal spacer/o ring combo allowing the injector to be seated correctly.

Please don't go grinding anything.

scotty nm35 Grand Master

scotty nm35

Posted
Posted

That VPW fitting should work, I can get a hold of one and check it fits if you like, before you buy them, and work out what top spacer you will need too, as that needs to shortened by the same amount.

Huzqld Enthusiast

Huzqld

Posted
  • Author
Posted

Thanks Scotty that would be great. Since I've organised the tuner for Friday it's all turned into a bit of a rush.. So I need to have them ordered early today.

If you've got one you can get hold of to check that would be awesome.

If I can't sort the top spacers out today I'll just space the rail up and sort that out after the tune

scotty nm35 Grand Master

scotty nm35

Posted
Posted

Thanks Scotty that would be great. Since I've organised the tuner for Friday it's all turned into a bit of a rush.. So I need to have them ordered early today.

If you've got one you can get hold of to check that would be awesome.

If I can't sort the top spacers out today I'll just space the rail up and sort that out after the tune

I just had the wholesaler flow test a 1650 shorty and you may have a problem with that idea. With that lower extension on the cone sprays out wide enough to hit the edge. It would have to be modified with a 45 degree chamfer, but this leaves the raw alloy exposed to the ethanol which is not a great long term option. It may get you by until you find a better solution though. Let me know if you want me to sort something out for you, I can probably make something up today and send the top and modified bottom extensions express.

Huzqld Enthusiast

Huzqld

Posted
  • Author
Posted (edited)

Hey Scotty

I spoke to efi hardware, they have some adapters they Say won't affect the spray pattern, (they said the others do like you said)

and then I just run half height extensions on the top to make them full length

So hopefully that will work

*sorry short extensions on top

Edited by Huzqld
scotty nm35 Grand Master

scotty nm35

Posted
Posted

Hey Scotty

I spoke to efi hardware, they have some adapters they Say won't affect the spray pattern, (they said the others do like you said)

and then I just run half height extensions on the top to make them full length

So hopefully that will work

*sorry short extensions on top

You don't want full height, you need 3/4 height for the neo.

scotty nm35 Grand Master

scotty nm35

Posted
Posted

Man, this is getting crazy, an adapter on each end, full length, the injectors will move around too much for my liking... You really don't want them popping out while driving, they need to be firm so make sure you keep the rail height down to minimum.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Boost cut after swap(RB25DET NEO) R34

      By GTSBoy · Posted

      Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
    • MBS206
      S1 rb25/s14 starting problem

      By MBS206 · Posted

      I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Duncan
      S1 rb25/s14 starting problem

      By Duncan · Posted

      Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
×
×
  • Create New...