Jump to content
SAU Community

Recommended Posts

  • 1 month later...
  • 1 year later...

Hate replying to an old Thread, But i found limited resources on the matter. so ill just leave this here for future reference.

I have just put leds in my 33. and long story short, they are no good.

although very bright, the light scatters much to quickly without the aid of a projector, so basically the lights hurt your eyes to look at but dont illuminate much of the road.

also making to h1 clip fit around the cooling fans on the back of most leds was a nightmare, and the cap on the rear of the headlight housing wont fit them either,

puting standard bulbs back in tomorrow.

 

cheers

i have had them in my r32 gtr for years, i love them, 
set up properly they work very well, they seem to get allot of keyboard hate but when their setup properly they work very well with no "blinding" bullshit.

 

the reason i went for LEDs is because i dont like the shitty blue tinge light of HIDs and their are NO good options for ordinary bulbs. their just rubbish for R32s.

i would like to go retro fitted HIDs but i have N1 lights so not really an option and quite expensive.

 

Edited by GH05T
3 hours ago, GH05T said:

i have had them in my r32 gtr for years, i love them, 
set up properly they work very well, they seem to get allot of keyboard hate but when their setup properly they work very well with no "blinding" bullshit.

 

the reason i went for LEDs is because i dont like the shitty blue tinge light of HIDs and their are NO good options for ordinary bulbs. their just rubbish for R32s.

i would like to go retro fitted HIDs but i have N1 lights so not really an option and quite expensive.

 

interesting, I have N1 lights as well and was recently looking at LED lights to improve the current setup

any particular brand you used or ebay one? got any comparison pics or current pic of the setup?

And your pictures prove your lights have heaps of glare and foreground  :4_joy:

Yes, there are H4 LED bulbs that try to mimic the halogen output, even Philips has one (not legal, 5,000 hrs rated lifespan and very expensive). But this thread is about H1. Adjustable ones are obviously good to get the best out of them, but at the end of the day you're trying to shove a different set of optics into something that wasn't designed to handle them.

https://images.philips.com/is/image/PhilipsConsumer/12953BWX2-APP-global-001?$jpglarge$&hei=700

 

thats HighBeam your looking at from a phone camera, hey im not here to sell a product.

if i had the choice of standard globes vs led i would defiantly prefer to actually see. the optics designed in the 80s are not my cup of tea so yeah im defiantly looking to retrofit something better. and i would recommend anyone with projectors look at retrofitting the whole unit. why stick with very very poor light output?

H1 vs H4 is more to do with the connections, the question as i read it is more to do with the LED system vs halogen.

but hey man, if you dont want to use them im not gonna have a go at you, im just putting forward my experience with the options asked about.

 

Edited by GH05T
17 hours ago, GH05T said:

thats HighBeam your looking at from a phone camera, hey im not here to sell a product.

 

No point comparing halogen low beam to LED high beam then aye, why not post both or swap one and leave one halogen :rolleyes:
Oh and look up foreground lighting and how it affects your vision while driving. And there are other factors that affect output, e.g. hazed lenses, which R33s tend to have. Clear them up and throw in some Osram NBU/Narva Blue Plus bulb and then save up for a retrofit.

If LEDs did work, I'd happily recommend them, but unfortunately they are not an upgrade. And yes the R32 projectors are atrocious. This thread is talking about R33 reflectors though, which don't have a cutoff shield to reduce glare.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I was using the wiring diagram I have So 12.74V is coming into the rear Fuel Pump relay as I measured.  When I turn the key to ON im getting 0.6V to the Fuel Pump plug; which i assume is backfeed voltage and doesnt include the 12V from ignition power.  The rear relay is working and being triggered.  From the diagram I clearly see the rear relay 80 = Rear Relay going into the Body/H loom (R-27) 27 = Fuel Pump plug going into the Body/H loom (T-20) 40 = Short Connector (R-27) I'm reading 12.74V on the blue/black wire which is the power for the Fuel Pump   From this diagram I can see the Ignition relay goes into the front and up to the ignition  2 = Fuel Pump Relay <1M> (R-27) 37 = ING Relay <1M> I started from the pump using this reference Which the way I read it (referencing Nissan wiring color codes) is: Pin Wire Color Function 1 B/P (Black/Pink) Ground 2 L/W (Blue/White)        ECU Trigger 3 SB (Sky Blue) Fuel Pump 5 L/B (Blue/Black) 12V Constant Tested SB to SB on Fuel Pump for continuity - confirmed Tested negative on Fuel Pump to 12V battery and L/B - confirmed 12V Pulled the relay putting 12V between Pin 1 & 2 and testing continuity on Pin 3 & 4 - confirmed relay   So that has me looking at this part of the circuit to understand whats happening here...and im still confused. From best I can tell; the disconnect is back to my previous diagram; between Ignition Relay and Fuel Pump Relay...which yet again; afaik is where the immobiliser should.    Thats what I was trying to explain to GTSboy; im not trying to fix it myself; yet I seem to have to get a Masters in Electrical Engineering (while im busy doing my actual job of DevOps & Cloud Engineering) somehow.  I just wanted more expert opinions; or more so that what I tested is correct and proves it to something around that area; to go back to the alarm tech (for a 3rd time) that he needs to fix it. He keeps telling me its not the alarm. He lives on the complete other side of the city so i understand not wanting to make a trip but as I said before if its the alarm it should be up to him to fix it. But he's adament its not; even though I pointed out the FP was immobilised through the original alarm. To my mind; it seems that the ECU is sending the signal; but the ignition is not getting 12V down the line.       
    • Maybe also really stiffly sprung track cars. Get the inside wheel up in a corner and all the fun stops. Also me sometimes (rarely) when I have to stand on the brake to convince the diff to drive the wheel that is still on the ground when I'm trying to diagonally get over severe driveway entrance, etc.
    • I feel like I'm missing something. You had an authorised installer come out and install a new alarm. Post install the car doesn't start, and you aren't getting the installer back to fix what they did wrong?
    • So either way it is gearbox out and look what is wrong?  I know about the input shaft bearing. Even before swap/new clutch the it sounded exactly like this: So is that inout shaft bearing or the other was installed backwards?  And can some please tell me the part number for that input shaft bearing? The gearbox is small box from R34 N/A and number is FS5W71C. Thank you  
    • I am yet to see anyone ever regret a quaife or helical. ...other than drifting/skidpan duties. I kind of want to upgrade my factory helical with a Quaife (but really it's not ultimately that different, and is a MASSIVE UNDERTAKING), that's how good the hype is about them, that I want to try them 'just to see'  
×
×
  • Create New...