Jump to content
SAU Community

Rb26 Internals, And Jhh Built 26 Head

Stoney85
 Share

Recommended Posts

Stoney85 Collaborator

Stoney85

Posted
Posted

I've got leftover parts from my RB26 build.

N1 Block that has a cracked cylinder 6, possibly repairable if you were sleeving the block, otherwise a good coffee table, open to offers

R34 RB26 crank, grub screwed, race prepped, balanced, never machined - $400

R33 stock pistons and rods, one piston has a cracked and melted ringland - $100

Nearly new oil pump $100

RB26 balancer $100

Fully built JHH RB26 head, CNC porting, 1mm oversized supertech valve, supertech springs and valve guides too, Tomei 272 cams, however cylinder 6 will require rebuilding after a valve head decided it didnt want to play games anymore, entertaining offers on the head, I'll probably keep it and fix it up, was used in a setup making over 400kw on 21psi with a GT3582R, the idle this gave the 26 was what dreams were made of, WERE made of (FML) I'll try find the receipts for this head, but there is $1000's spent on it, lots of thousands

I'll get some pics up soon

Located near Coffs Harbour, NSW

Stoney85 Collaborator

Stoney85

Posted
  • Author
Posted

Hopefully i've replied to all the PM's, my phone recently died, so i'm running a potato for a phone now, i could probably sketch a picture with more detail than what that would give you.

  • 3 weeks later...
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • The king 2.0
      Nissan fuga 450gt android screen

      By The king 2.0 · Posted

      It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • Nizzy_R34
      r34's love to squeal

      By Nizzy_R34 · Posted

      just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • Duncan
      Engine sputter

      By Duncan · Posted

      My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Duncan
      S1 Autech 260RS Wiring Diagrams

      By Duncan · Posted

      Awesome, thanks for sharing!
    • Duncan
      Nissan fuga 450gt android screen

      By Duncan · Posted

      To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...