Jump to content
SAU Community

Recommended Posts

I've been looking at different ways to get myself an R34 GT-R the last few months after selling my R33 GTS-4 while sorting out funds. My options seem to be either buy locally by private sale, or dealership (seems hard to find this way), or through importing (have been looking at rough quotes from iron chef, and genuine imports in NSW, and carizma, and at previous 34 auctions on prestige Motorsport in WA).

Buying locally seems to be much higher in price, and more so through dealerships that stock imports, may have questionable condition, history, and kms, while importing seems a bit more cheaper (more money for mods) if I am patient, which I'm fine with.

Just wanted some more up to date feedback than what I've found on the forums so far. I'm not too fussy on the type of GT-R, I'd love a midnight purple II though but am open to other colors, not fussy on kms (120,000kms would be fine for example), just has to be in a normal condition and fairly stock.

Any thoughts on this would be greatly appreciated, as I've never imported before. I've only bought my last two R33's as the second owner in Aus. Thanks!

If you're buying a GTR that's already landed in Aust I'd preferably buy one through a car club on Fb or SAU itself. If a member here doesn't wish to fix up problems, he's more likely to sell it through gumtree or carsales.

If you're trying to source it from Japan, your importer will try and procure one from private treaty or at an auction house. Some auction houses attract better or poorer/cheaper cars than others. Some importers may have a man on the ground to do a physical inspection as well as pore over the auction sheet. Some Japanese owners may set too high a reserve and the car may get passed in only to reappear a couple of weeks later.

Doing your maths:- Add about AUD$12,000 to your Yen Bidding Limit and then compare with what you can procure here in Aust.

Well, you do get to look at the car in person if you go local, but so many of the local ones are complete rubbish. Odometer windbacks, accident damage, other issues. And most sellers (particularly dealers), tend to deny having the import paperwork with the car. If you import, it's cheaper, you get more choice, and you get the paperwork with it. (Assuming you go with a proper importer like Iron Chef or J-Spec).

+1 for importing.

I guess it all depends on what you find, but as Terry said the SAU members who sell their cars do look after their cars and are more genuine when it comes to these things.

I was looking to import one myself however I really wanted to see the car in flesh. I've found the car and I just put a deposit on a 2000 34-Vspec, which has done 67,000 (auction sheet 3.5 and de-reg cert - proving the kms) Nice mods and has been going to RacePace since 2008 for mods and servicing.

Just a matter of finding the right one - take your time and I'm sure you can find something local.

Thanks for all the great advice guys, I will definitely look on SAU for any that catch my eye and at a good price, and will probably write off carsales/gumtree and dealerships as an option just due to not being able to trust their history unless they have full paperwork like dereg kms and service history.

As for importing I will most likely go through iron chef to try look for one at a good price seeing as I'm not really in a hurry to get one, I have a japan trip next month I'm saving for but will use that to find some 34R parts while I'm there. If I find an R at a steal of a price it'll be worth the wait. Iron chefs rep is also really good from what I've read on the forums, plus my own contact with them was really friendly

Hi OP,

I speak from experience for this one. I have imported a GTR specifically but I have gone through the process.

You won't get a great indicative pricing on how much it'll cost you landed and complied. There are a lot of things that come into play.

It also depends on how much you're willing to spend here. You won't be able to feel the car, nor test it. All you've got are a couple dozen pictures, an auction sheet and the company you have hired to help you with the process. Honestly though, you might find that it can be a hit and miss situation, you'll find awesome cars, bid too low and lose it to another buyer or bid too high for a car that doesn't have all the goodies you wanted in the first place.

If you have a good idea of what you exactly want then a company like Iron Chef Imports etc can help you find something equivalent or close to it. Especially for a GTR which doesn't come around too often, you might spend months looking for one that will suit you.

Then after you pick your car, you'll have to go through the import and compliance process which can take a month or two as well, depending on the amount of work that needs to be done to the car and the RAWS queue. During the compliance stage, the car has to be returned to stock for inspection so this may set you back some dollars if the compliance shop isn't well equipped etc. Once again, if you find a reputable company for imports I'm sure this won't be too much of a problem.

All in all, you pay for what you get most of the time. If an R34 GTR cost you $35k to import then something is definitely wrong with the car, whether it be R/RA conditioned or just mechanically crap. Find a reputable agent to help you import, one that has the right contacts for what you're trying to import and you'll be fine!

Good luck!

I imported one a few months ago through J-Spec. I think I was a little more specific than you (I wanted blue, under 60,000km, had to be V-Spec or better and grade 4 or better, preferably 4.5).

Long story short I found exactly what I wanted, blue grade 4.5 V-Spec with 37,000 original km's complete with paperwork and entire service history since new. It cost me about $56k inclusive of everything except registration/insurance. The dollar was much stronger vs the yen when I bought though, from memory I got around 95 yen per Aussie $. Either way, if that same car were selling locally the person would probably be asking 65k+ (judging by what's on car sales now).

Oh and it's almost completely stock, including the original factory tyres on the original rims. Lol. Safe to say I'd import again no worries.

  • Like 1

You can't use recent auction sales or landed prices in AUD as any sort of guide, the exchange rate has dropped by 15% in the last 2 months. Simply put, even if you can find a 35,000 R34 you will have to pay more like 45,000 for it this now.

At the moment, every car in the country came in under a much better exchange rate, so we are probably in one of those unusual times where you will get better value locally than importing.

Thurrzor, you have to be very careful with the lower grade cars (3.5 for example). There is an enormous condition gap between a 3.5, 4 and 4.5 and remember it's generally down to the inspectors opinion. When I was buying, I saw a V-Spec II with 18,000 genuine KM that was rated grade 4, however it had so much rust that it wouldn't have passed compliance here in Aus, rendering the car useless and unregisterable.

A lot of inspectors at auction houses won't pay attention or comment on rust. You'll find that any good importer like iron chef or j-spec will simply tell you they won't bid on a car with those sorts of issues regardless how much you beg. I can't imagine anything worse than getting a grade 3.5 car here that won't comply to Australian standards, even if you only paid 25 - 35k.

Edited by ADP91

Hmm you're right ADP91, I'd be pretty sad if I had found out my car was full of rust and couldn't be complied here after dropping all that money. The fact that so many different people say that iron chef are super picky on your behalf sounds really reassuring, so they will be my pick. Your GT-R sounds amazing btw!

Knowing that previous GT-R sales have been going when the dollar was high also gives me and indication of how less I'll get compared to others now that the dollar is low atm, so I'd be paying almost the same as ones here but might get the paperwork and quality through importing.

There is no doubt in my mind that importing is the better option if you're after quality and variety. My advice is to spend the money and get the best possible car, the higher your budget the less time it takes to find 'the one' because your options will be more open. In terms of paperwork and history, some will have it and some won't. Again, the more expensive (and clean) the car is, the higher the chance it has been properly looked after with books. I'd say most 4.5 rated cars would come with a good amount of paperwork (that's probably part of the reason they get a 4.5 rating), I even got 2 spare keys which I thought was cool.

And yeah, J-Spec or Iron Chef would be perfect. I say J-Spec because I used them and the car speaks for itself.

Edited by ADP91

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
    • Onto the android unit. You need to remove the top screen because there is a daughterboard to put inside the case. Each side vent pops out from clips; start at the bottom and carefully remove upwards (use a trim remover tool to avoid breaking anything). Then the lower screen and controls come out, 4 screws, a couple of clips (including 3 flimsy ones at the top) and 3 plugs on the rear. Then the upper screen, 4 screws and a bunch of plugs and she is out. From there, remove the mounting brackets (2 screws each), 4 screws on the rear, 2 screws top and bottom and 3 screws holding in the small plates on each side. When you remove the back cover (tight fit), watch out for the power cable for the fan, I removed it so I could put the back aside. The mainboard is held in by 1 screw in the middle, 1 aerial at the top and 3 ribbon cables. If you've ever done any laptop stuff the ribbon cables are OK to work with, just pop up the retainer and they slide out. If you are not familiar just grab a 12 year old from an iphone factory, they will know how it works The case should now look like this:
    • Switching the console was tricky. First there were 6 screws to remove, and also the little adapter loom and its screws had to come out. Also don't forget to remove the 2 screws holding the central locking receiver. Then there are 4 clips on either side....these were very tight in this case and needed careful persuading with a long flat screw driver....some force required but not enough to break them...this was probably the fiddliest part of the whole job. In my case I needed both the wiring loom and the central locking receiver module to swap across to the new one. That was it for the console, so "assembly is the reverse of disassembly"
×
×
  • Create New...