Jump to content
SAU Community

Recommended Posts

For sale I have a set of BBS wheels with tyres to suit R34/R33/R32 Gtr.

Specs and details follows.

Wheels: Genuine BBS 18 X 10.2 + 20, two piece forged silver center with polished lip, made in japan, in as new condition.

Tyres: Achillies 123 semi 265/35/18, driven for 100km since new, 99% tread.

Accessories: Genuine BBS center caps, BBS chrome valves, and BBS hub rings 66.1mm.

Location: Ryde 2112, cash on pick up preferred, or can delivery Sydney metro for small fee.

Reason for sale: Selling as these are my spare set of wheels and need funds to do further mods to my car.

Price: $3,800

Contact: PM or 0416067895

Wheels and tyres are in as new condition driven only 100km since purchased off Piggza (Paul), original listing here http://www.sau.com.au/forums/topic/454056-bbs-lm-18-x-102-20/?hl=bbs+lm+wheels

Wheels new alone would cost over $5000 plus tyres together would be $6000 if you bought new, so grab a bargain.

May consider swaps such as Nismo turbo inlet pipes, Nismo oil cooler, full complete exhaust ( 3.5 inch or twin 3 inch) or anything in very good condition to fit R34 Gtr with cash adjustments.

post-137648-0-25128000-1445335943_thumb.jpg

post-137648-0-95734600-1445335994_thumb.jpg

post-137648-0-06734700-1445336095_thumb.jpg

post-137648-0-64169900-1445336137_thumb.jpg

post-137648-0-63730000-1445336191_thumb.jpg

post-137648-0-42188600-1445336217_thumb.jpg

post-137648-0-97551600-1445336301_thumb.jpg

post-137648-0-47067600-1445336373_thumb.jpg

With Christmas around the corner, these look tremendous. Out of interest, how much does a rim weigh?

Hi Terry, from the website each wheel weight 10.6kg, I just checked together with tyres and they weight 22.4kg. Last time My LM GT4 18x10.5 with tyres weight 21.4 kg, so these are 1 kg heavier, but still lighter than alot of other wheels.

By the way bumped into Steven the other day and he says you bought the titanium exhaust off him, was thinking about getting them, if you ever decide to sell or trade let me know, cheers.

18x10.2 were the custom MINE'S BBS wheels IIRC.

it also says 10Jx18 ET20 on the wheels lol.

Yes you are correct, realised it after posting but won't let me edit so have updated on third post, cheers.

Yes you are correct, realised it after posting but won't let me edit so have updated on third post, cheers.

Was more for people crying foul over false advertising than you haha.

I'm sure if you ask an admin, they can fix it up. Or become a SAU supporter and do it yourself!

Hi Terry, from the website each wheel weight 10.6kg, I just checked together with tyres and they weight 22.4kg. Last time My LM GT4 18x10.5 with tyres weight 21.4 kg, so these are 1 kg heavier, but still lighter than alot of other wheels.

By the way bumped into Steven the other day and he says you bought the titanium exhaust off him, was thinking about getting them, if you ever decide to sell or trade let me know, cheers.

Steve at Lansvale? Yes, that's right! Fujitsubo Ti.

I actually replaced an expensive Mine's exhaust with it - for weight saving, on the N1.

Anyway, on with the show folks!

Lovely BBS set F/S still !!!

  • Like 1
  • 1 month later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Possibly avoid using a Cometic one unless the deck/head surface are perfectly flat. I did have a look just then and forgiving gaskets such as Tomei or Nitto don't exist for the FJ20, however the Bar-Tek or Kameari ones look good and might do the trick.
    • Because pipe threads for pipe things. M threads for bolt things. Throw some teflon sealant onto it and dust your hands off knowing you did the right thing, instead of going twice around the block to achieve a result using the wrong things. Of course, all of these solutions are ignoring the fact that the minimum thread pitch we're talking about here is 1.25mm, with the 1/4" in NPT or BPS being out around 1.4mm. You will need to know that the boss you're tapping has enough thickness for at least a few threads. That's one of the reasons that 1/8" is commonly used - because the pitch is <1mm. And why would you look to use 1/4" NPT in a BSP country anyway? Ugh.
    • Just throwing around ideas, does it need to be in the compressor cover? Why not the hot side piping?
    • 1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
    • 3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
×
×
  • Create New...