Jump to content
SAU Community

R34 Gt-r Bits - To Sell, Trade And Wanted.

No Crust Racing

By No Crust Racing,
in For Sale (Other Items)

 Share

Recommended Posts

No Crust Racing Grand Master

No Crust Racing

Posted
Posted
Wanted:


VSpec front and rear diffusers.

Vspec pedal set.

Front inner wheel plastic sections - front most pieces left and right.

Rear spoiler, genuine or copy - but must be standard style. Carbon wing blade welcome.

Black wheel nuts - preferably Rays.

Rays Centre caps.

Nismo black drop sheet style seat covers front/rear.

Nismo gear knob, either the leather one or a black GT500 style one.


Things I will be selling/have to swap.


ARC Titanium Gearknob.

Bodyform Top Secret style FRP diffuser, with carbon look leading edge. Goes all the way back to the cross member. Pic below is of the same part, i can get full pics of the actual part when I collect it.

Rays red wheel nuts.

Standard mirrors in silver.

Standard guards in silver.


Freight to Wodonga will be required but I can also collect if anyone is in Canberra as I'll be up that way the weekend after this one. Collection from Melbourne also possible.


Cheers


post-23873-0-44131900-1445507321_thumb.jpgpost-23873-0-50891400-1445507371_thumb.jpgpost-23873-0-01398400-1445507387_thumb.jpg

No Crust Racing Grand Master

No Crust Racing

Posted
  • Author
Posted

Have acquired/located OEM front and rear diffusers, oem rear spoiler and FRP/Carbon jun style wing stands, black wheel nuts, nismo gearknob and seat covers.

Still need guard liners and vspec pedals.

  • 4 weeks later...
  • 2 months later...
No Crust Racing Grand Master

No Crust Racing

Posted
  • Author
Posted

Will also soon have the following bits.

Tomei stainless manifolds.
Tomei stainless dumps.
Full exhaust including after market front pipe, 3" exhaust, 3.5" at the muffler. I may keep the cat though as it's stock.
Stock manifolds.
Manifold shields.
Full set of oil/coolant lines from turbo side.
Stock turbos.
Stock cam gears
PowerFC with hand controller
AFMs

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      Ok i will get those 310mm. I found one but on a different site. This is the description on those...is it ok? Technical parameters: - Axle: front. - Disc type: ventilated. - Number of holes: 5. - Disc diameter: 310mm. - Total height with center: 54mm. - Thickness (new/min.): 30/28mm. - Designed for brake calipers manufacturer: Sumitomo.
    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      You Gregged a whole racetrack!?
    • GTSBoy
      R32 GT-R: 4WD Light Turns On After Bumps – Code 19 (ETS Motor) But No Issues Found

      By GTSBoy · Posted

      Look for broken wire or bad connector at the motor. Might not be it, but is worth starting there, as it is easy.
    • Bireley_32
      R32 GT-R: 4WD Light Turns On After Bumps – Code 19 (ETS Motor) But No Issues Found

      By Bireley_32 · Posted

      Hi everyone, I’m having an issue with my R32 GT-R. Sometimes, when the car goes over a bump or experiences some vibration, the 4WD warning light comes on the dashboard. When I check the code from the control unit in the trunk, it shows Code 19 – ETS Motor. However, everything seems to be working fine — if I turn off the engine and restart the car, the light goes away and everything functions normally. Has anyone experienced this before? Where should I start troubleshooting this issue? Thanks in advance!
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
×
×
  • Create New...