Jump to content
SAU Community

Recommended Posts

Yeah I did this as I blew my s1 head up and only had a s2 replacement. They fit in there fine, have pulled the caps off after running for a while and there's no scoring or anything so I'm going to say thats ok to do that. The CAS is interchangeable as well (I think its the neo's that change?) but you will need s2 coil packs or vice versa as they bolt into the head differently but I think you can get away with changing the cradles instead as only like 2 bolts don't line up...

I believe the only difference is the CAS engagement. I think I looked into it a while ago because I wanted to upgrade the CAS to the Hitachi type. As long as you get the late R33 RB25 cam, it still runs hydraulic lifters, where as the NEO one runs the Hitachi CAS but solid lifters.

As above, its only the late R33's that this applies to, Early series 2's still ran the old style CAS. If you look at the catalog of Tomei cams, you see there is one for a 2 year range of R33's around 97-98

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • LOL, all of the CAI like Craig I just need to put a hole saw through my bumper Done and dusted, the car runs, which is nice, I'll take it for a spin when the weather clears up Just need to put the bumper back on for good
    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
×
×
  • Create New...