Jump to content
SAU Community

Can Anyone Tell Me What To Do?

Bigbob

By Bigbob,
in Classic & Vintage (1950's-1980's)

 Share

Recommended Posts

Bigbob Apprentice

Bigbob

Posted
Posted

Hi All,

I am new to forums, and very unfamiliar with this type of communication, as I was brought up in the era of snail mail and telefax etc, (I am sure you understand.)

I have a Skyline R31, 3.0Ltr engine, wagon, and currently I am not able to enter the front drivers door, because the handle has become total cracked and unstable which allows the key to not operate sucessfully.

The handle I discovered is made of a sturdy "plastic", and while I thought that was rather unusual I attempted to find a replacement, but to my dismay I have yet to find a replacement.

In relation to my research for this part, I wondered whether amongst the many people who own Skylines, whether others may have come across this issue, and whether there is a "fix", (maybe off another type of vehicle??) that would be suitable and give me the pleasure once again to open my door with my key.

My vehicle is an 1989, (series 3) Skyline, 3.0, Station Wagon, the handles are rectangular in shape and you lift to activate the release mechanism. If that is of any assistance, i am unable to access my photo of my handle but can supply one if that can be of any assistance.

:unhappy: :unhappy:

Hoping someone can help, I would be most grateful. Regards Bigbob

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/461145-can-anyone-tell-me-what-to-do/
Share on other sites
Duncan Grand Master

Duncan

Posted
Posted

Hi Bigbob and welcome to SAU.

Almost certainly your only option is to buy a 2nd hand replacement from a wreck, check gumtree, ebay or wreckers (in order of price :)) eg http://www.ebay.com.au/itm/WRECKING-1990-R31-NISSAN-SKYLINE-MANY-PARTS-AVAILABLE-/321903415081?hash=item4af2f04f29:g:VVkAAOSwo0JWLfao

BTW R31 Stageas are awesome.

  • Like 1
blind_elk Grand Master

blind_elk

Posted
Posted

You might have a bit more luck over at http://www.r31skylineclub.com/

Quite often, Nissan would use the same part in different models, eg I think it is the door handles on a 240Z are the same as on the 1600 (the Z handle was of course more expensive!). So it is likely that another model may use the same handle.

One solution to your door locking problem (although more expensive) would be to install a remote locking kit.

  • Like 1
  • 2 months later...
  • 11 months later...
Bigbob Apprentice

Bigbob

Posted
  • Author
Posted

Hi All,

         I ended up buying a scond hand handle mechanism from Ebay, and installed that then went and bought a key to fit the lock, I am now OK, thanks to your info,. and feedback. Regards, Bob

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Watermouse
      Original window sticker?

      By Watermouse · Posted

      I got a full sheet set of OEM copied stickers to replace all the faded engine bay ones, great quality too.  Came from England. Someone like that should be able to to make u up what u want so long as u have a quality image to show them 🤷🏻‍♂️
    • myrbgivesmeheadaches
      RB25DET NEO Cylinder Head

      By myrbgivesmeheadaches · Posted

      Did this end up working? Did you take some pictures?
    • Duncan
      V37 Suspension change

      By Duncan · Posted

      And finally, the front lower mount. It was doubly weird. Firstly, the lower mount is held in with a bracket that has 3 bolts (it also acts as the steering lock stop), and then a nut on the shock lower mount itself. So, remove the 3x 14mm head bolts , then the 17mm nut that holds the shock in. From there, you can't actually remove the shock from the lower mount bolt (took me a while to work that out....) Sadly I don't have a pic of the other side, but the swaybar mounts to the same bolt that holds the shock in. You need to push that swaybar mount/bolt back so the shock can be pulled out past the lower control arm.  In this pic you can see the bolt partly pushed back, but it had to go further than that to release the shock. Once the shock is out, putting the new one in is "reverse of disassembly". Put the top of the shock through at least one hole and put a nut on loosely to hold it in place. Put the lower end in place and push the swaybar mount / shock bolt back in place, then loosely attach the other 2 top nuts. Bolt the bracket back in place with the 14mm head bolts and finally put the nut onto the lower bolt. Done....you have new suspension on your v37!
    • Duncan
      V37 Suspension change

      By Duncan · Posted

      And now to the front.  No pics of the 3 nuts holding the front struts on, they are easy to spot. Undo 2 and leave the closest one on loosely. Underneath we have to deal with the wiring again, but this time its worse because the plug is behind the guard liner. You'll have to decide how much of the guard liner to remove, I undid the lower liner's top, inside and lower clips, but didn't pull it full off the guard. Same issue undoing the plug as at the rear, you need to firmly push the release clip from below while equally firmly gripping the plug body and pulling it out of  the socket. I used my fancy electrical disconnect pliers to get in there There is also one clip for the wiring, unlike at the rear I could not get behind it so just had to lever it up and out.....not in great condition to re-use in future.
    • Duncan
      V37 Suspension change

      By Duncan · Posted

      Onto the rear lower shock mount. It's worth starting with a decent degrease to remove 10+ years of road grime, and perhaps also spray a penetrating oil on the shock lower nut. Don't forget to include the shock wiring and plug in the clean.... Deal with the wiring first; you need to release 2 clips where the wiring goes into the bracket (use long nose pliers behind the bracket to compress the clip so you can reuse it), and the rubber mount slides out, then release the plug.  I found it very hard to unplug, from underneath you can compress the tab with a screwdriver or similar, and gently but firmly pull the plug out of the socket (regular pliers may help but don't put too much pressure on the plastic. The lower mount is straightforward, 17mm nut and you can pull the shock out. As I wasn't putting a standard shock back in, I gave the car side wiring socket a generous gob of dialectric grease to keep crap out in the future. Putting the new shock in is straightforward, feed it into at least 1 of the bolt holes at the top and reach around to put a nut on it to hold it up. Then put on the other 2 top nuts loosely and put the shock onto the lower mounting bolt (you may need to lift the hub a little if the new shock is shorter). Tighten the lower nut and 3 upper nuts and you are done. In my case the BC Racing shocks came assembled for the fronts, but the rears needed to re-use the factory strut tops. For that you need spring compressors to take the pressure off the top nut (they are compressed enough when the spring can move between the top and bottom spring seats. Then a 17mm ring spanner to undo the nut while using an 8mm open spanner to stop the shaft turning (or, if you are really lucky you might get it off with a rattle gun).
×
×
  • Create New...