Jump to content
SAU Community

Recommended Posts

Hey guys, got a question. Where are your stock r32 gtst temp gauges are sitting? Recently bought myself a 92 Skyline r32 gtst and its bothering me that temp sitting a bit above the middle, its sitting stable but not sure if its normal to be there or if my engine is running hotter than should be all the time or if the gauge is faulty.
Any input would be appreciated. Thanks

Link to comment
https://www.sau.com.au/forums/topic/461245-temperature/
Share on other sites

Thanks lads, how hard is it to get the aftermarket temp gauge hooked up? Or is it just easier to take to a work shop to get that done? Anyone knows how much gauge install would be roughly if it was done in a shop?

Link to comment
https://www.sau.com.au/forums/topic/461245-temperature/#findComment-7643384
Share on other sites

Yerh will check out some Youtube stuffs tonight and see whether I got stuff required to get it done at home. Also, does anyone know whats the go this days with gauges and where they can be on the dash without being f***d by police should you get pulled over?

Link to comment
https://www.sau.com.au/forums/topic/461245-temperature/#findComment-7643396
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Bit of a pity we don't have good images of the back/front of the PCB ~ that said, I found a YT vid of a teardown to replace dicky clock switches, and got enough of a glimpse to realize this PCB is the front-end to a connected to what I'll call PCBA, and as such this is all digital on this PCB..ergo, battery voltage probably doesn't make an appearance here ; that is, I'd expect them to do something on PCBA wrt power conditioning for the adjustment/display/switch PCB.... ....given what's transpired..ie; some permutation of 12vdc on a 5vdc with or without correct polarity...would explain why the zener said "no" and exploded. The transistor Q5 (M33) is likely to be a digital switching transistor...that is, package has builtin bias resistors to ensure it saturates as soon as base threshold voltage is reached (minimal rise/fall time)....and wrt the question 'what else could've fried?' ....well, I know there's an MCU on this board (display, I/O at a guess), and you hope they isolated it from this scenario...I got my crayons out, it looks a bit like this...   ...not a lot to see, or rather, everything you'd like to see disappears down a via to the other side...base drive for the transistor comes from somewhere else, what this transistor is switching is somewhere else...but the zener circuit is exclusive to all this ~ it's providing a set voltage (current limited by the 1K3 resistor R19)...and disappears somewhere else down the via I marked V out ; if the errant voltage 'jumped' the diode in the millisecond before it exploded, whatever that V out via feeds may have seen a spike... ....I'll just imagine that Q5 was switched off at the time, thus no damage should've been done....but whatever that zener feeds has to be checked... HTH
    • I think Fitmit had some, have a look on there (theyre Australian as well)
    • Hah, fair enough! But if you learn with this one you can drive any other OEM manual. No modern luxury features like auto rev-matching or hillstart assist to give you a false sense of confidence. And a heavy car with not that much torque so it stalls easily. 
    • Actually, I'd say all three are the automatic option. Just the different trim levels. The manual would be RSFS, no? 
×
×
  • Create New...