Jump to content
SAU Community

Recommended Posts

So I bought my 89 GTS-T Type M couple weeks ago and it's been such a blast. I have never driven RHD (USA lol) and was super excited to own a Skyline.

I have just begun to list upgrades and list the normal stuff to check.

So the problem I'm having with the climate control is this. .......

Everything works (all buttons do what they are suppose to do) but the actual display screen doesn't work properly. It mostly just doesnt light up at all.

Shown below (not my unit)

2015-11-29%2002.18.41.jpg

The front defroster button and the button to close the vent have a green light when they are activated. Sometimes they are both lit even though I didn't touch them. I tapped on the controls and sometimes the display shows up but it's either all lit up or kinda faded. It goes in and out sometimes.

I took it all apart and found only 4 of the 6 little lights work for the buttons. No biggie but I can't figure out why the display doesnt work. The controlls all seem to work right, just doesnt show the display. I took the board out and clean it up. Not sure what else it could be....

Anyone have a clue as to what I should try n do? I don't have another to swap it either.

Thanks,

B-Turbo

Edited by B-Turbo
Link to comment
https://www.sau.com.au/forums/topic/461352-r32-climate-control-issue/
Share on other sites

I would assume that if the display isnt working properly then the screen has an issue. Wether that be a connection issue or the screen itself is had it. If it were me, I'd get another climate control unit, however i dont know how common R32's are as wrecks to steal parts off over there (or people who pull the A/C out of there car)

It still may be better to just replace it unless you feel confident pulling the unit apart and having a look

My 90 GTR has a similar issue - I can't seem to find any R32 climate control units for sale on ebay presently; I'm about to buy an R33 unit and figure out if it works once and for all (unless someone can confirm either way beforehand!)

$80 isn't too bad I think. Long as is in good condition all around. There isn't really anyone to go to and take parts for these cars lol. I'm gonna call the dealer I bought the car from and see what they got. They have a list of parts on their site.

http://japanpartsservice.com

My 90 GTR has a similar issue - I can't seem to find any R32 climate control units for sale on ebay presently; I'm about to buy an R33 unit and figure out if it works once and for all (unless someone can confirm either way beforehand!)

Is the r33 unit plug and play with the r32 connectors??

I would assume that if the display isnt working properly then the screen has an issue. Wether that be a connection issue or the screen itself is had it. If it were me, I'd get another climate control unit, however i dont know how common R32's are as wrecks to steal parts off over there (or people who pull the A/C out of there car)

It still may be better to just replace it unless you feel confident pulling the unit apart and having a look

I tore it apart down to the board. I honestly can't see anything wrong but I haven't done circuitry that much. Sometimes it seems like things are crossed somewhere but I'm not positive

Edited by B-Turbo

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I now seem to be limited in power due to my rev limit/hydraulic lifters in my built RB25. I'm looking into converting over to Tomei solid lifters. Question for anyone that has done the conversion. I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  I don't know where I got this idea, as so far I see no mention of this in any of the Tomei documentation. It just states I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
    • I couldn't agree more. I should have started from the get-go with a NEO or solid bucket conversion. I started looking into converting over to solid lifters yesterday. Now for some reason I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  But I see no mention of this on any of the Tomei documentation. It just states that I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
    • BRUH, one of the biggest mistakes of my life..... and i've had plenty ;[)
    • @Murray_Calavera iam just considering options 🙂 of course it is very expensive so that why i ask here 🙂  @joshuaho96 I looked at that GCG hybrid(i remember looking at it few weeks before) So this is "that" hybrid where i send them my turbo and they upgrade the inside to Garrett stuff and then they send it back. It cost around 1200-1300 USD which is FAR cheaper than the HKS and it is what iam looking for(i just do not have experience like this...to send something off to "upgrade" ) @tylink720 that is like 150 USD turbo no? 😄 I dont think i have the "ease on my mind" with this kind of turbo. I just put over 7000k USD to "LINK" up my engine...dont want to blow it up with cheap turbo 😄     EDIT: https://www.cj-motor.com/gcg-turbo-charger-for-nissan-rb20det-rb25det-high?srsltid=AfmBOooVeOZ6CZ6r1AIv5m-KPaa6BvudIPJTY8LW78khkd-gQlsaCht9 I looked at this and it seems ok? It is that CGC hybrid and it costs around 1250 USD (with back shipping). Do any of you have experience with this hybrid on NEO turbo? I quickly look thru the forum/web and it seems very good.
    • Echo the awesome sentiment 👍 Definitely a car worth saving. Looking forward to seeing updates as well. 
×
×
  • Create New...