Jump to content
SAU Community

Recommended Posts

I have a confession to make .. once I sold my C34 I didn't keep up with the Stagea models and trends. :( I have no idea about the M35.

Help me try to convince my wife that a Stag is the best family car option.

Likes;

Bluetooth

Screen / reverse camera

Black leather

Front power seats

dual sun roofs

Must haves;

4wd

Power! I notice that the 25t and 35 n/a are similar numbers - is that right? We don't necessarily need turbs so i'd be happy with 3.5 (assuming 350Z / Maxima donk?)

Good towing ability (Do many come from Japan with factory towbars?)

Do any come with 7 seats?

This is to compete with local Liberty, Kluger etc.

Would like to stay under 25k.

What do you think?

Do we have an M35 model differences thread? (for model equipment/features, not necessarily mechanical differences.) I'll add/update one if we dont have one.

C

Link to comment
https://www.sau.com.au/forums/topic/463351-m35-model-differences/
Share on other sites

An M35 Stagea is the best family car option. It's true, you read it on the Internet.

4WD: Check. Available with 2.5 turbo and 3.5 NA.

Power: Check. Available with 2.5 turbo and 3.5 NA. Lots of 2.5 knowledge on here, 3.5 knowledge is worldwide due to 350Z/G35 link. Popular consensus is 2.5T has more torque and slightly better performance stock but 3.5 is no slouch and a nicer place to be.

Good towing: This is a sticking point. Some have torn rear subframes towing heavy loads, other pull car trailers with no issues. I suspect it comes down to how the bar is mounted but I'm nowhere near qualified enough to speculate. I had a towbar fitted to mine when it came into the country but I only use it for lighter loads (<750kg total) and have a Commodore for heavy stuff.

7 seats: I haven't seen one yet, given the rear layout I can't see how one would work.

Under $25K: Pass. In NZ you'd struggle to pay half that for a decent one. Most expensive M35 on TradeMe at the mo is $NZ14,995 but he's dreaming for the spec.

Specs: Go for broke: http://specs.cars-directory.net/nissan/stagea/2001_431/ - Please buy a 350S. Please.

Considered stuff like the 370GT Crossover? Probably over budget though.

  • Like 1

Thanks Hertz.

The towing is usually light. We take a trailer camping with us for bikes, kayaks, tents etc. Currently the Passat doesn't even hiccup and besides the odd small jolt or noise from the back you'd have no idea it was there. This is what I'm looking for. Obv's if I hooked it up behind my Mazda 3 there'd be more tell tale signs that it was there. I reckon its always < 750kg. Def not towing boats or caravans.

7 seats is not a deal breaker. It'd be good for the odd scenario where grandparents and kids want to come.

The Axis looks the business, but the interior is a little loud. I'm sure I could replace the wood grain with back (I did that in My Bora. Best thing I ever did to it) but the seats are just a bit much. Do any Axis' come with black interior?

Do they all have screen / reverse / bluetooth ?

Screen / reverse camera was a factory option for M35's.

Bluetooth was not, but can be implemented a number of ways - new stereo being the most expensive, Grom units are cheap and run flash drives for music although they have do seem to have considerable echo during phone calls, or you could just get a generic bluetooth unit as you would with any car that does support it).

If your budget is anywhere under $25k, go with the PNM35. Much nicer car and if you do need more power than standard, you can throw some cash at it with a bolt on turbo/SC kit I suppose.

The only alternative I really see for the price would be a VE wagon.

  • Like 1

Do they all have screen / reverse / bluetooth ?

If it helps, I just installed a new head unit in my M35, cost me $120 for the unit, another $40 for harnesses, and took me a couple of hours of fiddling to get the job done (first time cracking the dash open). Includes Bluetooth music and phone calls, as well as complete hands free control if you are a smart (read: Android) user. Bottom line is that the factory Bose speaker aren't too bad, and a new head unit isn't as scary as people seem to think it is.

  • Like 1

If it helps, I just installed a new head unit in my M35, cost me $120 for the unit, another $40 for harnesses, and took me a couple of hours of fiddling to get the job done (first time cracking the dash open). Includes Bluetooth music and phone calls, as well as complete hands free control if you are a smart (read: Android) user. Bottom line is that the factory Bose speaker aren't too bad, and a new head unit isn't as scary as people seem to think it is.

What unit is it? Got a link? (Yes, I'm a smart user :thumbsup:)

I'm pretty sure this is it, I got it on special though. If you didn't live in Sydney, I'd happily drink a beer and point at screws you need to undo.

https://www.jbhifi.com.au/gps-car-audio/kenwood/kenwood-kdc-u563bt-200w-mp3-cd-tuner-with-usb-ipod-bluetooth/694636/

The Aerpro harnesses you can get at Autobarns/Ebay, whichever is your fancy, but don't forget to get an aerial adapter as well. This unit won't play CD's, either, but, who the heck uses CD's anymore, amiright?

Of note, Series 2 M35's don't come with a single DIN stereo.

As such, you would need the double DIN interior pieces and either a double DIN unit or the possibly the single DIN cradle from a series 1 M35 as well as as the double DIN interior pieces for the series 2- not that I have seen anyone do this conversion as yet, but I must say that I quite like the idea...

  • Like 1

Of note, Series 2 M35's don't come with a single DIN stereo.

As such, you would need the double DIN interior pieces and either a double DIN unit or the possibly the single DIN cradle from a series 1 M35 as well as as the double DIN interior pieces for the series 2- not that I have seen anyone do this conversion as yet, but I must say that I quite like the idea...

I happen to know that a mob in Campbellfield has a Stagea sitting in the front yard that has been picked clean, save for the dash that includes two single din slots. Mine bolted straight in, and I have the same set up. At least, I'm pretty confident I saw that, I just took the window washer bottle and ran back to the mechanic. Give them a shout:

http://www.gumtree.com.au/s-ad/campbellfield/wrecking/bb-auto-parts-wrecking-2002-nissan-stagea-m35/1106007411

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yup. You can get creative and make a sort of "bracket" with cable ties. Put 2 around the sender with a third passing underneath them strapped down against the sender. Then that third one is able to be passed through some hole at right angles to the orientation of the sender. Or some variation on the theme. Yes.... ummm, with caveats? I mean, the sender is BSP and you would likely have AN stuff on the hose, so yes, there would be the adapter you mention. But the block end will either be 1/8 NPT if that thread is still OK in there, or you can drill and tap it out to 1/4 BSP or NPT and use appropriate adapter there. As it stands, your mention of 1/8 BSPT male seems... wrong for the 1/8 NPT female it has to go into. The hose will be better, because even with the bush, the mass of the sender will be "hanging" off a hard threaded connection and will add some stress/strain to that. It might fail in the future. The hose eliminates almost all such risk - but adds in several more threaded connections to leak from! It really should be tapered, but it looks very long in that photo with no taper visible. If you have it in hand you should be able to see if it tapered or not. There technically is no possibility of a mechanical seal with a parallel male in a parallel female, so it is hard to believe that it is parallel male, but weirder things have happened. Maybe it's meant to seat on some surface when screwed in on the original installation? Anyway, at that thread size, parallel in parallel, with tape and goop, will seal just fine.
    • How do you propose I cable tie this: To something securely? Is it really just a case of finding a couple of holes and ziptying it there so it never goes flying or starts dangling around, more or less? Then run a 1/8 BSP Female to [hose adapter of choice?/AN?] and then the opposing fitting at the bush-into-oil-block end? being the hose-into-realistically likely a 1/8 BSPT male) Is this going to provide any real benefit over using a stainless/steel 1/4 to 1/8 BSPT reducing bush? I am making the assumption the OEM sender is BSPT not BSPP/BSP
    • I fashioned a ramp out of a couple of pieces of 140x35 lumber, to get the bumper up slightly, and then one of these is what I use
    • I wouldn't worry about dissimilar metal corrosion, should you just buy/make a steel replacement. There will be thread tape and sealant compound between the metals. The few little spots where they touch each other will be deep inside the joint, unable to get wet. And the alloy block is much much larger than a small steel fitting, so there is plenty of "sacrificial" capacity there. Any bush you put in there will be dissimilar anyway. Either steel or brass. Maybe stainless. All of them are different to the other parts in the chain. But what I said above still applies.
    • You are all good then, I didn't realise the port was in a part you can (have!) remove. Just pull the broken part out, clean it and the threads should be fine. Yes, the whole point about remote mounting is it takes almost all of the vibration out via the flexible hose. You just need a convenient chassis point and a cable tie or 3.
×
×
  • Create New...