Jump to content
SAU Community

Recommended Posts

Just curious as to 0-100 km times from the factory for a JZX110 Mark II IR-V (5 Speed Auto) Vs V35 Coupe 350GT (5 Speed Auto).

I know V35 350GT's (VQ35DE) are quick from the factory (I used to own one!) and I've had a V36 350GT (VQ35HR) and that was noticeably quicker too... so where does a JZX110 Mark II (1JZ-GTE)...?

The V35's have and excellent auto box from the factory and a sensational engine...

...but the Mark II's have the legendary 1JZ-GTE! (torquay as phuk with 378 Nm from 2400rpm).

Thanks in advance!

*Prefer real world answers opposed to guesstimation.

Even if the Mk II didn't win (which I would be very surprised if it didn't) it would sure sound and look a whole lot better doing it ;)

1JZ > VQ any day. And I'm not even a Toyota fanboy (truth be told I am probably a Nissan fanboy), J's are just the best engines!

I have an old Wheels mag floating around somewhere (circa 2007), where they test drove one in a "bang for your buck" article. The stock auto ran a respectable 14.4 in a 98/99 chaser. I'll have a look for it tonight- I dont usually buy Wheels, but it had a decent R35 GTR article I wanted to read.

If the articles I've seen on G35 driver are anything to go by, a stock auto V35 coupe will run a 14.6 in full auto, and low 14's in tiptronic and a small brake stall at launch.

Thanks for the feedback (still welcoming more!) I'm very curious to know more info from that wheels magazine you read.

PS: Whilst I'm a Nissan fanboy (based automatically on the high % of Nissan's Vs Everything else that I've owned... 1JZ is life.

(and VQ engines are award winning... 10 years straight, don't forget!)... It's just that 1JZ = God tier ;)

Would love to know JZX100 / JZX110 stock auto 0-100 km times (accurately).

I'd put my money on the JZX... Might be a different story against a V36 though

"The tacho needle flies around the dial faster than you would believe possible and our test automatic nails 0-100km/h in a scant 5.65 seconds before crossing 400 metres in a stonking 13.18. We then test rolling acceleration. The automatic kicks down and 80-120 disappears in 3.4 seconds, leaving us absolutely gob smacked."

My chaser never felt that fast when it was stock... that quarter mile time sounds a bit far fetched for a stock JZX to me. Plus the JZX110 is heavier than the JZX100.

But who cares about 0-100's now adays. I'm seriously considering a car I can drive closer to the limit through the hills like a little hot hatch with awesome handling. V36 is pretty boring :(

Edited by GFXman
  • 2 weeks later...

I loved my V36 (and V35) I really, really did... but I understand what you mean Julian... when you describe a 'pocket rocket' for your next car.

Where I'm excited for the JZX110 is the excellent amount of torque usable at such low revs... which is perfect for a daily driver (especially commuting through traffic, overtaking, traffic light wars etc haha).

*I still care very much for 0-100 times :ninja:

I've only been in manual V35s but I'd guess 0-100 they'd be pretty even stock, throw an exhaust on them both the JZX will probably be slightly ahead.

They'd be close enough to get which ever you prefer the look & feel of.

Where I'm excited for the JZX110 is the excellent amount of torque usable at such low revs...

This is what I loved about the chaser. It was great (and that sound).

What I didn't like was the ETCS which wouldn't let you have any fun around corners. Would limit power until you were travelling in more of a straight line. I'd look into disabling that ;)

Old JZX thread about it http://www.jzx100.com/forum/topic/89-disabling-etcs/?p=50830

Also, if you aren't aware, North Shore Toyota (NZ) on the JZX forum is a great source for parts. Often cheaper than buying here.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...