Jump to content
SAU Community

Recommended Posts

Hi,

My R33 has only 93,000kms but it's a fresh import.

1997 GTST Turbo Automatic Coupe 40th Anniversary Model. 11/97

1/ Is it worth getting the timing belt replaced?

2/ If yes whilst the engine cover is off is it worth replacing the water pump and is it?.. the two harmonic bearings? Purely to save the labour charges....

Not sure what the average timing belt replacement costs are these days, I just remember my old 1994 Skyline cost around $1,200 to get similar work done back in 2004 but think they also replaced the spark plugs and fixed a power steering leak.

Link to comment
https://www.sau.com.au/forums/topic/463866-r33-gtst-timing-belt-replacement/
Share on other sites

If it has never been done, I would do it.

They snap without warning, and you don't know the history of the engine.

Definitely do the timing belt tensioner and idler bearings at the same time.

Water pump is debatable.

Some say don't fix what isn't broken.

Some say may as well whilst you're there.

If it is showing any signs of leaking, change it.

If not, it's entirely up to you.

change the lot: belt, idler, tensioner, cam seals, crank seal, and water pump..

save money buy buying a major service kit for about $400 then pay a mechanic to install it to avoid the mark up.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...