Jump to content
SAU Community

Rb25 Bolt On Highmount Turbo Setup Gt3582 Garrett

monts
 Share

Recommended Posts

monts Explorer

monts

Posted
Posted

hi guys and girls i have a highmount setup to suit rb engines. This is a complete kit pulled out of freshly built motor. Was basically run in and never made it to power tune by the previous owner of the vechile. I wish to go in a different direction.

this is a direct bolt in kit with just about everything you will need hot side wise

kit includes

- gt3572rl ball bearing original garrett turbo. .82 rear t3. Feels to be some normal shaft play. There are some small superficial chips on the blades. I dont think it will effect operation much however if you feel its an issue i got quoted 300 for a brand new comp wheel or 450 to upgrade it to a gtx billet wheel for that extra spool action ?

- high mount manifold with a 45mm gate port

-45mm turbosmart hypergate

-braided oil line and also water lines included. Basically all lines and high quality fittings included. oil drain line will need a new section of hose which is about 20cm.

-custom made dump pipe 4 bolt flange plumb back gate. can be easily modified for screamer if your that way inclined. high flow cat and 2 bolt flange l on at exhaust end

-intake pipe and filter

kit has been removed and ready for collection.

any questions please call or text 0410616101

rb25det rb30 rb2530 rb2630 rb26 skyline gtst gtt

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Lithium
      Garrett G Series

      By Lithium · Posted

      Oof. One of my mates has an R34 GT-R that he initially was a "I want to go twins for response and convenience" on his stock 2.6 with Kelford 272 cams, but his friends are pests and were always in his ear about their place being in the bin.   Eventually one of the 2860-5s decided to add it's own input and force his hand, so he conceded and went for a Pulsar 6262G ("G35 900") with T4 0.85 hotside.    Here's an overlay of the results, same cams, same stock bottom end, same boost, same fuel, just from a pretty tidy 2860-5 install to a Pulsar turbo on a 6boost maniifold on BP98.   Worth mentioning here, it may seem like a dead horse thing but the dyno plot doesn't tell the story of how much better it is to drive - transient response has completely changed the car, he used to have flat foot shifting to stop it having to wind up again on gear changes even at >7000rpm... now it builds boost faster than that even short shifting.   It's 100% transformed the car before you even consider how much better it holds on: Pulsar and Garrett aren't the same, but from our experience if you're just looking for a better drive and the ability to make the same or more power I think the divided G30 770 would probably be the smallest I'd go to.
    • robbo_rb180
      Neil's R33 Gts-t Build

      By robbo_rb180 · Posted

      Great work Duncan, any events local you will give it a test once all done? 
    • robbo_rb180
      Rob's S Chassis track cars. Now with more s15 and less 180sx

      By robbo_rb180 · Posted

      Sweet, yeah hoping stock gears will hold up. May use the transbrake feature on hill climb starts so that will test it.
    • GTSBoy
      What Bucket Seats Do You Have In Your R34 Gtt?

      By GTSBoy · Posted

      Yeah, the thread is only nearly 20 years old.
    • Duncan
      Neil's R33 Gts-t Build

      By Duncan · Posted

      Been down in Tassie for 2 weeks (a cruise, not a race for once) but spent a little time on her when I got back. I worked out the injector settings in the PowerFC were not correct for nismo 555s, set those to 66% +10ms and added a little air at closed throttle, set the timing (approximately, because it has some weird non 15o cells around idle) and now she starts and idles properly. She purrs like a kitten (ignore the co2 alarm in the background, I did  ) 20250518_171052.mp4 Next step, off for run-in, tuning and alignment!
×
×
  • Create New...