Jump to content
SAU Community

30 25 neo with gtx3582r

lcxu105

By lcxu105,
in Engines & Forced Induction

 Share

Recommended Posts

lcxu105 Proficient

lcxu105

Posted
Posted (edited)

Ok. To start with this engine is in a lc gtr torana. So it's fairly tight in the engine bay.  Pic of engine bay is old setup 25neo

I'm about to get my head back for my 30 25 neo and need some help pointing me in the right direction on a couple of questions at the end of the post.

But first I will give you a full spec list of the setup. 

Specs are

30 block

Crank welded and modified for 25 oil pump

All resized and nitrared so as new.

Spool h beam rods arp bolts

ARP main and head studs. 

87mm Forged arias pistons -10.4cc

Zero deck height

Jim berry modified clutch 4200 pound clamp

N1 oil pump

N1 water pump. 

2 x 1mm oil restrictors

1.3mm mls head gasket

Head has exturnal vct mod -3 lines. Ported inlet and exhaust performance valve springs and type b pon cams. Head cc is decked to 49cc

Giving me a 8.5 to 1 comp

Freddie intake manifold match ported 

1000cc bosch injectors e85 compatible

Walbro 460 intank pump. 

Custom made steam pipe exhaust manifold hi mount

Gtx3582r with 45mm exturnal gate off exhaust housing. 

Running 22 to 24psi for pump 98

3 inch from turbo back exhaust

100 cel cat straight through muffler. 

The only thing that will be holding it back is I only have a r34gtt Nistune ecu with hpx1 afm at the moment. 

I have read several post on here about cam timing and still haven't heard of anyone getting the best setup or no one is willing to let on.

I'm also not sure if I should dump my spitfire coil packs in favor of ls9 truck ones.

Also not sure if I should dump the factory cas for a rossi cas trigger. 

20150826_173956-1.jpg

20160720_190941.jpg

2016-07-30 09.24.15.png

Screenshot_2016-07-30-09-25-45-1.png

20150826_173956-1.jpg

20160720_190941.jpg

2016-07-30 09.24.15.png

Screenshot_2016-07-30-09-25-45-1.png

Edited by lcxu105
Missed some info
  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/466048-30-25-neo-with-gtx3582r/
Share on other sites
KiwiRS4T Grand Master

KiwiRS4T

Posted
Posted

 No-one got back to me with the "secrets" of cam timing but my local shop suggested better valve springs but you have addressed that... and I fitted an adjustable cam gear to the exhaust to be tuned on the dyno. What sized rear end do you have on your GT3582R?

The only downside I see to your build is the relatively low CR at 8.5:1 but you may be able to overcome that with heaps of boost. Will not be so crisp off boost.

No need to change the splitfires ( I used brand new OEM gapped to 0.8mm) - if you find they are not keeping up you can change them later. The Nistune may not hold you back so long as you have an AFM that can cope. When and if you change to a more sophisticated ECU you will probably need to replace your CAS with some other kind of trigger.

Depending on the spec of your turbo I am picking you should make at least 400KW

lcxu105 Proficient

lcxu105

Posted
  • Author
Posted

Its a .82 rear on the gtx3582r.  If I can feed more boost into it I will. 

Being that the engine is in a lc gtr torana that is only 1000 kgs I'm not to worried about it off boost. 

Due to the fact that the 30 bottom end will produce more torque than the 25 neo it should be fine. 

Roy Grand Master

Roy

Posted
Posted
5 hours ago, lcxu105 said:

Thanks for that. 

Will get some picks when I get the head back hopefully by the end of the week.

Always wanted an LJ. Strangely I am more a 6 cylinder guy than V8s.  I was really trying to get my brother to buy one but I ended up getting him an SS Chevelle out of the US. Mega cruiser but LJ would have been a more entertaining drive

Rbdirty30 Proficient

Rbdirty30

Posted
Posted

Nice colour! I like the slr style front spoiler too! I had a LJ close to that colour a few years ago, I miss that car 579f36af5cf99_ImageUploadedBySAUCommunit
Id like to see how the 25/30 goes in the torana, I've only been in them with 186's and 202.

lcxu105 Proficient

lcxu105

Posted
  • Author
Posted

Like a cut snake on water. 

With the 25 neo same top end less porting and 18psi boost 422rwhp cold do 0-100 in less than 4.2 seconds.  And standing 1/4 in 10.9.

Had it up over 235ks on Lakeside raceway. 

I'm looking to make an extra 100hp at the wheels and a shit load more torque. 

I hope that the 20g is worth it. 

  • 2 weeks later...
  • 2 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      Lock up the old for sale / wtb threads.

      By Duncan · Posted

      Ha, I've never pressed the X in all these years incase it removed the notification for all Admins
    • Duncan
      Blue/grey smoke after idle

      By Duncan · Posted

      I don't know, I've never done it that way, but 1. While it is an interference engine, there is still clearance between the valves and the piston at all points in the regular timing cycle 2. There is not a lot of distance before you can't catch the top of the valve stem any more I don't know if 2 is greater or less than 1. But 3. If it doesn't work out you are f**ked, engine is coming out to disassemble so it is a big bet.
    • Duncan
      Unpeeling the Orange

      By Duncan · Posted

      Semi slicks are horrible for road use, just use a high performance road tyre unless you really need the maximum grip. Noisy, unpredictable (amazing, until they are not), expensive due to very high wear and not good in cold and particular wet. And yes, it is a thing to store cars on stands instead of tyres if you know they are going to be parked up long term.....but who ever realises that a short park is going to stretch into years before it is out again!
    • MBS206
      Unpeeling the Orange

      By MBS206 · Posted

      I know in Australia you'll definitely get above 30c. Parked in the shade in Summer you'll be above that. 😛 But in cooler climates, you might get that warm driving on the highway for a bit, but you'd never get to full heat temp. I'll try and find some of my historical tyre temps between Aus summer and winter (be aware immin the warmer area of Aus too.)
    • sunsetR33
      Blue/grey smoke after idle

      By sunsetR33 · Posted

      I get that taking off the head is best but that's a bit much for "just" valve seals. I was just under the impression that one would be able to rotate to TDC and be able to temporarily drop the valve without losing it and effectively having to remove the head to then recover it. I never knew people actually pushed rope into the cylinder to do valve seals hahaha So just to confirm, just going to TDC will not work? In that case I know when I do valve seals I'll maybe just remove the head and do some other things while I'm there, or just wait until I do an engine build.
×
×
  • Create New...