Jump to content
SAU Community

Recommended Posts

Pretty sure it'll fit. You've got multiple options with the piping:

  1. Go return flow and run custom return pipe under the cooler to connect to OEM piping. Pros: Legal. Cons: Long runs of piping, reduced ground clearance.
  2. Go GTR style flow and run return pipe through the battery tray, then custom bends to connect to OEM plenum. Pros: Shorter piping. Cons: Defectable.
  3. Go GTR style flow and get a front-facing plenum. Pros: Shortest piping, best performance. Cons: Defectable, expensive.

All that said the least amount of headache would be a ready-made aftermarket return flow intercooler with hard piping, something like Blitz or Cooling Pro. Sell your GTR one for a few $$, buy one of those, fit and plumb it up, trim front bar (and maybe reo) a bit, job done.

Custom piping will get expensive unless you know someone or are good with the welder.

Thanks for the reply mate. Yeah it currently has a front mount with custom piping. The front bar has been grinded back to make it fit and a hole drilled near the battery tray. The cooler came with the car and is some chinese brand. If the gtr cooler is a upgrade then Ill look at the fitment of it. Engine will be coming out soon for a rebuild, so Ill play around with it then. Front facing plenum sounds interesting.. Are they a worthy upgrade? Have heard mixed things about them. Im not to fussed on legality of it as it will be mainly a track car. Probably end up trailering it in the future anyways.

GTR cooler may or may not be an upgrade.  How can we tell when we have no idea about the Chinese one you have.

Seeing as you already have the plumbing in place, if you really really really want to do something, then follow advice above, sell GTR cooler to fund purchase of one that absolutely is known to be better.

FFP are of no use to you unless you are;

  1. making squazzillions of powers and/or,
  2. desperate for the space required to fit a massive top mount turbo, in which case see 1.
  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah well per the video it took 15s for the stock unit to start up....even if I give it a few seconds discount for starting that is at least 12 sec before you get a reverse camera if you are trying to leave a park.  The android unit is way faster, but 2016 for the stock unit is a long time ago in consumer electronics
    • Yea that’s why I said ima test them with multimeter and see the reads.
    • Only at idle. Isn’t a problem when rev it seems.
    • @Haggerty This seems silly to ask, but are you confident in your ability to tune the Haltech?  
    • Next on the to-do list was an oil and filter change. Nothing exciting to add here except the oil filter is in a really stupid place (facing the engine mount/subframe/steering rack). GReddy do a relocation kit which puts it towards the gearbox, I would have preferred towards the front but there's obviously a lot more stuff there. Something I'll have to look at for the next service perhaps. First time using Valvoline oil, although I can't see it being any different to most other brands Nice... The oil filter location... At least the subframe wont rust any time soon I picked up a genuine fuel filter, this is part of the fuel pump assembly inside the fuel tank. Access can be found underneath the rear seat, you'll see this triangular cover Remove the 3x plastic 10mm nuts and lift the cover up, pushing the rubber grommet through The yellow fuel line clips push out in opposite directions, remove these completely. The two moulded fuel lines can now pull upwards to disconnect, along with the wire electrical plug. There's 8x 8mm bolts that secure the black retaining ring. The fuel pump assembly is now ready to lift out. Be mindful of the fuel hose on the side, the hose clamp on mine was catching the hose preventing it from lifting up The fuel pump/filter has an upper and lower section held on by 4 pressure clips. These did take a little bit of force, it sounded like the plastic tabs were going to break but they didn't (don't worry!) The lower section helps mount the fuel pump, there's a circular rubber gasket/grommet/seal thing on the bottom where the sock is. Undo the hose clip on the short fuel hose on the side to disconnect it from the 3 way distribution pipe to be able to lift the upper half away. Don't forget to unplug the fuel pump too! There's a few rubber O rings that will need transferring to the new filter housing, I show these in the video at the bottom of this write up. Reassembly is the reverse Here's a photo of the new filter installed, you'll be able to see where the tabs are more clearing against the yellow OEM plastic Once the assembly is re-installed, I turned the engine over a few times to help build up fuel pressure. I did panic when the car stopped turning over but I could hear the fuel pump making a noise. It eventually started and has been fine since. Found my 'lucky' coin underneath the rear seat too The Youtube video can be seen here: https://www.youtube.com/watch?v=uLJ65pmQt44&t=6s
×
×
  • Create New...