Jump to content
SAU Community

GTR Parts rb26

20SIX
 Share

Recommended Posts

20SIX Community Regular

20SIX

Posted
Posted

 

Rb26dett complete hotside, includes: intake cross pipe

Turbos x2, manifolds, heat covers, dump

Pipes, braided water and oil feed lines and fittings. $550

Rb26 coil packs inc ignition loom. $150

Rb26 engine loom and ecu $180

Gtr 440cc injectors and fuel rail $100

Bilstein adjustable suspension $400

Rb26 cas $80

Rb26 plenum and runners $120 ( no throttle bodies)

Rb20 afm $60

Rb20 cam covers $10

Gearbox cover plates $10

Rb cam gear backing plates $10ea

57a96b14d4200_ImageUploadedBySAUCommunit57a96b386a9b8_ImageUploadedBySAUCommunit57a96b54494e3_ImageUploadedBySAUCommunit57a96acd4bdd9_ImageUploadedBySAUCommunit57a96adde1884_ImageUploadedBySAUCommunit57a96afce32a9_ImageUploadedBySAUCommunit

 

ImageUploadedBySAU Community1470720716.269724.jpg

ImageUploadedBySAU Community1470720732.844397.jpg

ImageUploadedBySAU Community1470720763.879112.jpg

ImageUploadedBySAU Community1470720787.770401.jpg

ImageUploadedBySAU Community1470720823.338410.jpg

ImageUploadedBySAU Community1470720851.369221.jpg

Link to comment
https://www.sau.com.au/forums/topic/466196-gtr-parts-rb26/
Share on other sites
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      ZF 6HP26 to RB30 block

      By GTSBoy · Posted

      Wow ELVIS. You have an....interesting approach to conversation. Did you not notice that I wasn't talking to you?
    • ELVIS
      ZF 6HP26 to RB30 block

      By ELVIS · Posted

      Hello Liam - HA - somewhere in flies - possibly I have an update, but I have been so busy, projects have taken a back seat to getting business back on track.  I will let you know the outcome, but I think I am going to go for the 8HP,  CHEERS.  ELVIS
    • ELVIS
      ZF 6HP26 to RB30 block

      By ELVIS · Posted

      Thanks Joshuaho96, yes - as someone else also suggested, the 8HP seems the 'smart choice' - HA - and ZERO to do with cost, but I am sure 8 speeds will be better than 6 speeds - HA - maybe.  I will purchase a new 8HP,  Thanks.  ELVIS.
    • ELVIS
      ZF 6HP26 to RB30 block

      By ELVIS · Posted

      Nobody said anything about getting a "...cheap Falcon box..."- it was JUST a question about a specific transmission.  And YOU may have a problem with not enough $ - HA - I do NOT - so please keep your comments like you are some financial guru to yourself.  BUT - much appreciated re the cost of a new 8HP and I twill probably be the way I go.  Thanks.  ELVIS.
    • joshuaho96
      ZF 6HP26 to RB30 block

      By joshuaho96 · Posted

      Most people I know in the BMW world are swapping 6HPs for 8HPs. The 6HP has a big issue with one of the clutch drum bushings wearing out shockingly early which leads to them going into limp mode going into 5th/6th gear as the oil pressure loss from the worn bushing causes clutch slip. Even with the adaptations in shifting the TCU can't bump line pressure enough to keep the clutches from slipping and burning. I've personally looked at a 335d with 6HP28 with one owner and ~90k miles on it and the transmission adaptations were way out of spec and even though it nominally drove ok I'm confident it would have needed a full rebuild sooner than later. Other than that they're fine, but the 8HP doesn't really have weird issues like this to my knowledge and they're in everything these days so pulling them out of crashed cars isn't too hard.
×
×
  • Create New...