Jump to content
SAU Community

Happy Laps Lakeside Park - 09/10/2016


Recommended Posts

Happy Laps Lakeside Park - 09/10/2016
Event:
 
Happy Laps - Lakeside Park
 
 
 
Description:
 
A chance to get out on track for a fun cruise and have some om nom noms! Bit of spirited driving is allowed but it is still an event on a race track so a few rules need to be followed (see below). Breakfast will be served with bacon, eggs, beans and toast.
 
 
 
Location:
 
Lakeside Park
   
 
 
Date:
 
Sunday the 9th of October.
 
 
 
Time:
 
7:00 AM Arrival
 
7:30 AM Breakfast
 
8:00 AM On Track
 
 
 
Cost:
 
 
$35 for members
 
$50 for non members
 
 
 
Please note that this is a per person cost, any passengers are required to pay as well.
 
If you wish to come along to watch and not have breakfast it is free.
 
 
 
Requirements:
 
1. Participants must meet minimum age requirements for being on track.
 
2. The overtaking car is responsible for completing the overtaking move safely.
 
3. Overtaking is only permitted on straights, unless clearly waved passed by the car in front.
 
4. Overtaking move must be completed well before the end of the straight, and the car being overtaken must be given plenty of room.
 
5. Cars should not be more than 2 abreast at any point on the track.
 
6. Be aware of cars around you, in front and behind (and beside when being overtaken).
 
7. Do not assume that the car in front of you knows you are there.
 
8. Please pay cash on the day, no EFTPOS is available.
 
 
 
Lakeside Specific Rules:
 
9. No overtaking or cars side by side on the kink.
 
 
 
Payment Details:
 
 
 
Name: Skylines Australia Queensland Club
 
Bank: Westpac
 
BSB: 034 063
 
ACC: 354012
 
 
 
PAYMENT REFERENCE: Username&HappyLaps

 
Link to comment
https://www.sau.com.au/forums/topic/466567-happy-laps-lakeside-park-09102016/
Share on other sites

  • 2 weeks later...

i cannot wait to see what the limo is like with it's Pirelli PZero Runflats with all the driver aids switched off, sports mode suspension enabled and manual shifting via the steering wheel controls.

I am going pay on the day. Got a new Innovate SCG-1gauge to sort out and new front wheel bearings. Ball race bearings off eBay. And I drilled the hubs and added a grease nipple.

tmp_25782-IMG_20161005_210850945723605.jpg

tmp_25782-IMG_20161006_0006471221387777.jpg

tmp_25782-IMG_20161005_224242362682946.jpg

tmp_25782-IMG_20161004_191740-431574502.jpg

9 hours ago, petes-performance said:

I am going pay on the day. Got a new Innovate SCG-1gauge to sort out and new front wheel bearings. Ball race bearings off eBay. And I drilled the hubs and added a grease nipple.

tmp_25782-IMG_20161005_210850945723605.jpg

tmp_25782-IMG_20161006_0006471221387777.jpg

tmp_25782-IMG_20161005_224242362682946.jpg

tmp_25782-IMG_20161004_191740-431574502.jpg

Any reason you wanted to be able to grease the wheel bearings? 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Started sifting thru my brakes to decide which ones I will run on Clem   Made me think I should just put them all on Silver...for when brake fade just isn't an option   Should be able to bump rotor up from 343x32 to 348x36 off Supra. Not sure if the Supra annulus is right for the Alcons or APs but trying g to find a used Supra\M4 rotor to test fit The Alcons seem to gain 1-2mm clearance which all helps  
    • So car is getting a few mods to the cage and some jacking points welded in Meantime Ol Silver gets a new gearbox and shiny clutch.  Old Box is being set aside for Clem  
    • Probably speedometer itself if the odometer is ticking. If the needle is stuck from a bit of grease or something that can cause it to stay at 0. Or a cracked solder joint in the speedometer can do it too.
    • Thanks Fella’s   to take this off topic and to elaborate a bit more. I have an rb25/30 going into a r32 GTST.. expected to make around 600-700hp. Would you?   A) R34 GTT box   B) CD00#?  I’ve seen a few posts about the CD swap and sounds fairly involved with making it fit etc but if it’s worth the work then I’ll go that way
    • Lower at the hubs. Funny I forgot to mention that part. Do this pull here I turned the camera off too soon but the graph shows a drop at the top and that was because the pipe from the turbo blew off. The tuner said we could’ve made possibly another 15 whp. He also added if I switched to ethanol we could up the boost some more as well. I was comfortable capping it at the most of 20 pounds. Turns out the turbo pipe just needed a new worm clamp. Got home replaced that then did a third gear pull from 3k to 7200 rpm and the power was great to the top. I just got an ecu mounting bracket from IEE that I need to try and get everything to fit well. It’s a PITA to get the harness and ecu fit properly behind that kick plate 
×
×
  • Create New...