Jump to content
SAU Community

Recommended Posts

It's very very very expensive and all in Japanese.

It's available at a few tuning places in the Australia, but not for sale, only for use.

You need to be specially trained by Apex in Japan for them to sell it to you.

Datalogit however, is cheap!

Do a search on Laptop Power FC

..and its probably also coded for each individual workshop.

As the numbers are pretty small they can probably keep track of it.. If one copy was to "leak" then it will fairly easly be tracked by serial number back to the workshop it was licensed too. You can imagine they wouldn't be supported / licensed for too much longer after that.

I dont think its copyable..  You need a dongle or something...  and i dont think any crackers could be really bothered with it.

Like everything there are ways around dongles, which is just a socket you stick in 1 of ur input slots to verify you are the user it is registered to (used these all the time with registered versions of AutoCAD)

the dongle's simple to make, and it has been cracked... that's all I'll say. don't ask me how or where to get it as I won't help you.

Translated: I've been able to get a copy and make the fittings, but don't bother asking me for a copy or how to do the attachment as I won't give it to you..

Call a spade a spade.

hehe interpret it how you want, i'm just tryin to save myself the countless PM's I'll get about it, while trying to be as informative as possible.

Maybe once I finish reading this japanese Power FC tuning manual I might try my hand at some amature tuning. I mean if I can program EEPROM's to control servo motors depending on sensors this shouldn't be that hard :devil:

*sigh* i jus wanted to let you guys know that if you look in the right places its not that hard at all to buy yourself a copy... here's a hint... find out the japanese term for "Power FC Communication Software" then google it, somewhere in there is a post on a japanese BBS by a guy selling it for a touch over a grand (and instructions on how to make the dongle).

I'm not trying to rub anyone's nose in it. If I hadn't posted what I did would you have known that it was cracked or that it was available to purchase through dubious sources?

If that's what I get for tryin to help you guys out then I'll just keep shit to myself next time.

Funky if you get a spare 30 seconds email me the program [email protected] and I will crack it myself ;) My flat mate has just about finished his degree in Mechatronics engineering at uni so Im sure we can organise something

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...