Jump to content
SAU Community

Recommended Posts

FS: Wedsports TC105N

So I have impulsively bought new wheels which means my current ones are up for sale for the right price. Otherwise I'll keep them as a spare set.

Semi rare size of 18x10.5" +12 offset and currently have 265/35 tyres on at the moment with about 35% tread left and some inner camber wear on the rear.

The wheels themselves are in excellent condition with virtually no blemishes besides current brake dust - which will be cleaned before sale lol.

Looking at $2,300 (slightly negotiable) and can post but at your cost, otherwise pick up from the Hills District in NSW.

PM me on here, or text during business hours 0400-529-930

P4220019.jpg

P4220020.jpg

P4220021.jpg

P4220022.jpg

Link to comment
https://www.sau.com.au/forums/topic/468525-fs-wedsports-tc105n/
Share on other sites

BUMP

Will also consider a swap for good condition R34 GTR wheels (with caps) and tyres plus cash my way.

*Edit - Also, the front tyres have about 70% tread left, rears are about 30%

Edited by stag98
  • 3 weeks later...
  • 1 month later...
  • 4 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
×
×
  • Create New...