Jump to content
SAU Community

My R33 isn't starting, am out of ideas


Recommended Posts

I recently purchased an r33 gtst series 1. Understood it needed abit of work to getting it up to a nice proud standard. Drove it for a month and noticed it was getting worse to drive so I changed back to the pulsar to drive, bought a couple thing to get back upto scratch, the first on the todo list was the fuel pump to stop the bucking when accelerating and to cut back on the fuel burn. Seen how to do it seemed simple enough, after doing fuel pump my car has not been able to start, cranks but no start. I have noticed a cat over heat light on when trying to start then once I stop it turns off and the check engine light comes on, can any one give me any ideas on how to fix this problem or any ideas on what this problem could be. Could it be in the rare occasion of a dodgey fuel pump? I haven't driven it in about 2 months and just want to go for a nice drive. Any help is appreciated.

Link to comment
Share on other sites

If it was running before you replaced the pump, it's odds on that something in that area is the problem now.

Are you sure the new pump is physically installed properly? I've done this job a few times, and it's not the easiest thing to seat in the bracket. If it isn't in properly, and if the tank level is low, it may not pickup any fuel.

Are you sure you plugged the cables back in properly?

What fuel pump did you install, and did you have to redo the wiring (ie to fit a Wahlbro or similar pump)? If you've reversed the wire polarity the pump will run, but you won't get fuel to the injectors.

Can you hear the pump start running when to turn the ignition on? Get someone to help so you can get your ear in the boot.

If you've got someone to help you, you can remove the a fuel line (feed or return) from the fuel rail, and turn the ignition on - you should get fuel flowing (preferably into a container, not over the engine).

If you are competent with auto elec stuff, you can hotwire the fuel ump fairly easily, so it runs all the time.

Link to comment
Share on other sites

... what would the battery have to do with anything?

what made you think the fuel pump was making the bucking issue, sounds like an afm issue or ...well any of the massively covered problems with hesitation. how did you diagnose the problem to the fuel pump?

why would a fuel pump issue cause fuel burn? surely it would cause a leaning out issue?

work your way back, check whatever you have touched and see what is wrong. once its fixed i bet my balls your original issues are still there. search about hesitation/ bucking issues and work out whats actually wrong.

and if it hasnt been driven in a while do a service, fluids, filters, spark plugs, the basics :thumbsup:

Link to comment
Share on other sites

I went over coils and plugs nothing was wrong with them I went over a couple idea with the mechanic and he said it was common for the fuel pump to do such things, it was a big hesitation on acceleration and major bucking too, looked up a couple things on here and the few I looked at said fuel pumps to after they checked coils and spark plugs. I thought the battery may reset the ecu or clear code or do something

Link to comment
Share on other sites

  • 2 weeks later...

So turns out with after market pumps they turn on when connected wrong just don't pump, but when connected correct they still turn on and pump like they should. Problem solved. Running like a monster :) so this is what a gtst should feel like :) thanks for the assistance guys

Link to comment
Share on other sites

On 1/12/2017 at 11:15 AM, GeeDog said:

If you've reversed the wire polarity the pump will run, but you won't get fuel to the injectors.

I posted this reply to you on Jan 12th - what have you been doing all this time?

  • Like 1
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • Neostead, I'm looking to have a custom surround done that also has a slot for a fog light. Would you be willing to create a 3d model I can buy or create and ship me the part or even provide/sell the current model for me to modify? Cheers
    • Did some maintenance on the MX5, did the engine oil and filter which was uneventful, then I drained the coolant to put in the new reservoir and a thermostat, reservoir took 5 minutes  The thermostat, well that took.........3 bloody hours, what a job, the issue was the 3 bolts holding it on, one was easy, 2 were hidden and required a few 1/4 drive extensions, 1 more than I had, and a 1/4 swivel, which I also didn't have, and a good amount of playing contortionist  Getting the 2 unseen bolts back on was a time consuming nervous nightmare, as I couldn't see where they went there was alot of stabbing and hoping for the best, trying to line up a 8 mm bolt straight, which you cannot actually see or get a hand in there, with a 1/4 swivel in the mix was a nightmare Anyways, it's done now, all burped out, and run up to temp a few times, happily no leaks thank Jebus After the thermostat fiasco I decided I need a few mental health days away from tools before doing the rest of the servicing on it As for the Dunnydoore, it had the aircon regassed and it has a clean bill of health, thinking about taking it out on Monday for a cruise down the coast to look at some houses if weather permits 
    • In other important race car news, instead of fixing the race car I changed the crank seals on the chainsaw, because wood burner Some damn tight (and lock tighted) m6 head bolts Who knew plastic crank cases were a thing! Quick tip, don't trust the youtube videos that say you can pull the old seals out with the head on in a husky 440e...not true, their crank seal tucks in behind the cover both sides. I'm not sure I'm a psychopath, but these things are damn loud....hope I can put all the bits back in the right place    Happily, it is now back to turning fallen trees into a combination of firewood logs and wood chips....just need a clear day to get into it properly
    • I've got 60L of e85 in there at the moment
    • Don't forget to make sure the tank is full to the brim before you try to replace the fuel pump too, that is an essential step.
×
×
  • Create New...