Jump to content
SAU Community

Recommended Posts

This article lists it as street legal in Australia: http://www.ozzytyres.com.au/blog/the-nitto-nt-performance-and-invo-tyre-range/

Also Toyo refers to the R888 as street legal on their site, it's the same compound as NT01 (though different tread pattern): http://toyotires.com.au/tyres/motorsport-tyres/item/20-proxes-r888

Neither is really a street tyre though, my R888R's are super noisy at freeway speeds and wear a lot faster than my KU36's. Also they pick up a lot of debris from the street because of the soft compound, so I certainly wouldn't run them as the primary tyre on a street or mixed use car.

Link to comment
https://www.sau.com.au/forums/topic/468607-nitto-nt01/#findComment-7804564
Share on other sites

3 minutes ago, Subi001 said:

I ment I don't want to have 2 sets of wheels.

It will be cheaper to have 2 sets of wheels if you plan to do a lot of track time.

I had a set of Bridgestone semis which were great on the track but not good on the road so I sold them.. I got a second set of wheels at relatively low cost and got second hand slicks from the NZV8 series - they get rid of them when they drop off half a second per lap but are fine for track days. If you have quality track tyres then you will just waste them driving on the street (plus they will be marginal after a few km and in the wet).

If you are determined to have one set only then you have to favour street use and put up with less than optimum track times.

Link to comment
https://www.sau.com.au/forums/topic/468607-nitto-nt01/#findComment-7804650
Share on other sites

Want my car to be street driven and for track too. Want to spend money once on the tyres

It you really want to run a single set only get AD08R or similar. Not as hardcore as the NT01 but also unlike them actually good for both street and track.

Otherwise a dedicated second set of rims and tyres or the track would be a good call.
Link to comment
https://www.sau.com.au/forums/topic/468607-nitto-nt01/#findComment-7804662
Share on other sites

if you're serious about doing any track time then another set of rims/wheels will be needed. Great for track ain't great for street. Or as above, AD08R, but won't last long on street so cheaper to hav a 2nd set, in the long run.

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/468607-nitto-nt01/#findComment-7804675
Share on other sites

I run 315/30/18 nt01's on my rear and 265/35/18 advan ad08r's on my front and it's a winning combo for street and track and also has been suprisingly grippy and drivable in the wet... But yes the rears do pickup a lot of small rocks etc. but for the level of grip I'm now getting it doesn't bother me.

IMG_1484440065.535818.jpg.4d218c68452254
Link to comment
https://www.sau.com.au/forums/topic/468607-nitto-nt01/#findComment-7804786
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Absolutely could be. I collected data logs from when the O2 sensor was still out and also after I had replaced it so will try to compare them. Pretty confident that the affect is lowered with the new sensor, will check logs at the same RPMs/conditions. 
    • Hey guys Long time lurker, I daily a nm35 stagea 250t rs four and I've had it for almost 2 years (very reliable 👌). Issues or just looking for information ill always find myself here having a read, so thought id join.  3inch stainless intake, pod filter, AM performance turbo dump pipe, 3inch hotdog, 3 and half inch stainless to 3 and half inch AM performance blast pipes. Bc racing coilovers. 18inch rims Hdi intercooler and trans cooler soon.  Here's my car
    • thanks for the advice on the box... i was thinking the 6 speed was better for cruising on the highway but on closer inspection and comparison the Rb 5 speed box was not too different...  So the choice is going to be the RB25 box... if I can save up and find one at the right price  
    • Thanks Matt, yes that's what i am aiming for. Just going to apply the right voltage and grounds to the dash connector. Hence my search for these pins... any chance you know if these pins are in the same spot as the ones on the S15 Dash connector? as mentioned above on page 8?
    • Yes, unfortunately that's the one. Signal was noisy to begin with; after driving once and looking back at the logs I saw pressure constantly swinging between 0-200psi, or staying at 0 randomly for a few seconds. There's a lot of good sensors that share the same look and feel, so don't presume they're all bad. I bought mine for 20$ off Amazon and I should have read the reviews prior, as it's clear they're junk.  I purchased a lowdollerr motorsports sensor. 
×
×
  • Create New...