Jump to content
SAU Community

Recommended Posts

y34 timing chain kit

hi all, i wonder if anyone can help me to source a kit for my cedric, cant track any down in uk, only ones coming up is usa, or japan, was hoping to source closer to help, any help is appreciated thanks.

Link to comment
https://www.sau.com.au/forums/topic/468877-y34-timing-chain-kit/
Share on other sites

I think your best bet is Japan. Would still be cheaper than going through Nissan.

Try and find out if all the VQ timing chain kits are the same (Z33, V35, M35, E51 etc) would make life a lot easier finding them.

What engine? Vq30det?
I fix a lot of VQ engines, and have never seen a chain issue. Usually it's a guide or tensioner, or variable cam actuator causing issues.
Your best bet is a g35 chain kit from the US if it fits, or just go to Nissan with your Vin?
Try EPCdata for part numbers.

  • Like 1

thanks leroy and scotty, the problem i have is when you start up the revs are surging up and down, when i select driive it evens out and ticks over ok, accelarate to go and nothing, revs take a nosedive, there is a rattling when cold but goes when she warms up, my garage says it could be a streched chain throwing timing off hence the ask about a chain kit, or the cam sensor is goosed, the problem didnt just happen, ive noticed her having a miss while driving around the 60 mark like it misses for a second but has gradually got worse, cant drive her at all now, cheers for any info lads.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The issue now is the 'fuel cut' while driving, and when it happend, it does not stall. This, I did not test the fuel pressure while driving as I cannot with a fuel pressure gauge. I do have Nistune logs, yes. I have also replaced the MAF Sensor.   Also related to the FPG Fuel Hanger – I just realized that I need a Deutsch Crimp Tool to crimp some cables for the FPG Fuel Hanger. Need to purchase additional cables as the kit only included 2, which are for the float. FPG is has not responded to my emails so far after purchasing. I thought about taking it to someone and having it done professionally, but I am reluctant since everyone I took it to messed up in some way.  
    • There's a good German place in Brisbane if youre up for the drive 😛
    • The German place in Cabramatta was rock solid, fresh pretzel cooked to order back then. Then it went all quiet, after all the poker machines were removed, then I believe it closed for good. I did drive past the other week and noticed outdoor lighting a big screen, but no idea what is there now.  
    • Yeah I suspect even if you hold airmass per cycle/cylinder constant if you get too far away from stock you're still going to have problems running the factory tune within the bounds of the factory load scale. Cams, different displacement/rod ratio, etc. I'm just lucky that the GTIII-SS with wastegate boost + CA compliance cats is pretty much equivalent to stock turbos. When I have actual space I can finally get it tuned and modify the fuel system for flex fuel to 100% handle any detonation concerns when cranking the boost to whatever those dinky turbos can put out.
    • I would say no, why, because my daughter, who also lives in Goulburn, hasn't recommended us going there Pity, as we miss all the German joints around in Sydney, actually, the restaurants are the only thing I really miss about Sydney, and a special mention to Ishibanboshi at Bondi Junction, their Kara-age Don is heart cloggingly deliciousness (always added a special boiled egg...or 2) 😋 
×
×
  • Create New...