Jump to content
SAU Community

Recommended Posts

Well after my r32 gtr fuel pump setup. We all came to the conclusion that it was over kill.

I going for 800 hp and may run E85 later on. I looking to do the simplest setup, intank would be great. I'm not looking to upgrade alternator or nothing that crazy. But I am willing to run a separate power supply. I just think it's hard to do in a r33 gtr due to the tank design. I'm just wondering what people has done to achieve these goals. I'm still searching and hope by making this thread, maybe I'll get some new up today suggestions.

 

Link to comment
https://www.sau.com.au/forums/topic/469514-r33-gtr-fuel-pump-setup/
Share on other sites


Spend the change in Power FC Pro 


Boy never letting it go aye. Lol
I see some duel 460 surge tanks by radium. For around 5 hundred dollars. Looks clean and simple. Do you really feel that lift pump will be good enough.??

We're would you recommend returning it from the fpr. To surge tank or fuel tank. Also with dual pumps would I need a fuel cooler.
I'm looking for the simplest setup. Also was looking at fuel lab stuff. Like there variable pumps.

I would get the Aftermarket Industries surge tank as they're a little more compact and also you're supporting Australian products :)

Although the Radium stuff is porn.

You could run 2x Walbro 460L pumps in the surge into the rail and stage them via your ECU, wait.... you can't do that on a PowerFC Pro.

Yes FPR return to surge tank, surge tank return back into fuel tank. If you're constantly on corn juice, no real need for a fuel cooler however it's always good to run one regardless. Some people who don't mind losing boost space actually run their fuel coolers in there.

I support Australian products all the time. I just got 2 manifolds from Kyle at 6 boost. To date I have ordered 6 or 7. Next I ordered 2 extended sumps from Rob at face fab. So I really don't mind. Oh. Don't forget a power fc pro from an Australian mate. Lol

I'm still looking at fuel setup other guys are using. I could however use an rpm signal switch or boost signal switch to stage the next pump, when running the pro. But I'm thinking about using the Haltech ps2000. I have joined there fourm and seeing if I can work things out. Last time I mest with it. I noticed it has 2 method of tuning.

Next I had to setup the actual timing. Like using a timing light with a spark plug wire on number one cylinder to get the right timing and then input it. Next was fuel pressure and a whole bunch of other stuff just to start up. One of my problems was getting a good wiring diagrams of the plug and play harness for the pre-made harness that came with the ecu. Next was extra pins for the plugs to run extra stuff. Like outputs. I feel all of this is just me being lazy. Hence why I like the power fc.

I'll give it a good this time.

I know I'll need help.

 

 

2 hours ago, Borci88 said:

I would love to see a GTR make 800hp on 98 through a single 8mm fuel line... let alone when you add E85..

he's got a while before he gets there.. so when that time comes, we'll recommend using his return line as a 2nd feed and run a new return line lol

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...