Jump to content
SAU Community

Recommended Posts

R33 Headlights questions

Hello all.

After a few minutes of search on the forum, I don't find some informations thath I need (or I don't used right keywords).

My questions are:
1: What are differences between R33 headlights spec1, spec2 and spec3? what differences? they are all compatible on all r33? or the mounts change?
2: For the Xenon and Hid Headlight, the headlight level is automatic or manual electronic? (if you have high load on the trunk, it corrects the level automatically?)
3: For the Xenon, someone has the dimensions? (like that: https://hidkitpros.com/wp-content/up...dimensions.jpg

Thanks a lot
Greetings from Switzerland

Link to comment
https://www.sau.com.au/forums/topic/469719-r33-headlights-questions/
Share on other sites

Link doesn't work

Don't put HID kit in your halogen headlights. Don't put LED kit in, they're all shit.

Series 3 GT-R came with factory xenon/HID (bulbs starts with D, not H) http://www.kudosmotorsports.com/catalog/headlight-xenon-nissan-skyline-series-021997-p-534.html

See:

Make sure the (outer) headlight lenses are clear. Use a headlight restoration kit if they are hazy/yellow. Any hazing will reduce output. I think the R33 uses H1, so don't have much of an upgrade besides Osram nightbreakers/Philips x-treme vision. Make sure you aim them properly.

Not sure on the level adjustment, probably not auto/self levelling.

Do a retrofit! It isn't as hard as it seems. Your end result will be so much better.

7 hours ago, niZmO_Man said:

Link doesn't work

Don't put HID kit in your halogen headlights. Don't put LED kit in, they're all shit.

Series 3 GT-R came with factory xenon/HID (bulbs starts with D, not H) http://www.kudosmotorsports.com/catalog/headlight-xenon-nissan-skyline-series-021997-p-534.html

See:

Make sure the (outer) headlight lenses are clear. Use a headlight restoration kit if they are hazy/yellow. Any hazing will reduce output. I think the R33 uses H1, so don't have much of an upgrade besides Osram nightbreakers/Philips x-treme vision. Make sure you aim them properly.

Not sure on the level adjustment, probably not auto/self levelling.

Do a retrofit! It isn't as hard as it seems. Your end result will be so much better.

Thanks a lot for all those infos.

My problem is that I have to convert my headlights to LHD, and if I want to stay with Xenon Headlights, they must have headlight washers and auto/self leveling ajdustement.

9 hours ago, niZmO_Man said:

How strict are they at checking cars when you drive around? You might be able to get away with a Morimoto Mini H1 (switch the bulb to halogen during inspection time).

90's Skylines are RHD so...

With this kit you can use full halogen or HID?

 

Some other questions, I could preserve the Xenon Headlights, but i can't exceed 2000Lumen.

Some one know how can I do that? What bulb use with stock Xenon headlights?

21 hours ago, niZmO_Man said:

How strict are they at checking cars when you drive around? You might be able to get away with a Morimoto Mini H1 (switch the bulb to halogen during inspection time).

90's Skylines are RHD so...

The morimoto mini h1 are direct replacement on the xenon headlight of R33?

They are really strict.

Or it is possible to have xenon or hid kit with maximum 2000lumens?

I saw that there is hella projectors with magnetic leveling. Maybe its ok but I cannot find that.

No not direct fit. Retrofitting is opening up your headlights and mounting projectors in there. Work can vary quite a lot (read: lots of effort), especially on reflector headlights.

I think you should forgot about those cheap HID kits and focus on improving your current setup. Clear front lenses plus bulbs like the Philips X-treme vision.

OE series 3 GT-R is D2S I believe.

I think you'd be after the 25W D5S/D6S/D7S/D8S, which are supposed to be 2,000lm and not require self levelling/washers.

The point I'm making is, the H1 reflectors are designed for H1 bulb as light source, no benefits gained from throw in anything besides H1 bulbs, if you're after actual performance upgrade. Retrofit projectors from an Audi or something with the 25W HID projectors, or LED projectors from something like Prius V.

6 hours ago, niZmO_Man said:

No not direct fit. Retrofitting is opening up your headlights and mounting projectors in there. Work can vary quite a lot (read: lots of effort), especially on reflector headlights.

I think you should forgot about those cheap HID kits and focus on improving your current setup. Clear front lenses plus bulbs like the Philips X-treme vision.

OE series 3 GT-R is D2S I believe.

I think you'd be after the 25W D5S/D6S/D7S/D8S, which are supposed to be 2,000lm and not require self levelling/washers.

The point I'm making is, the H1 reflectors are designed for H1 bulb as light source, no benefits gained from throw in anything besides H1 bulbs, if you're after actual performance upgrade. Retrofit projectors from an Audi or something with the 25W HID projectors, or LED projectors from something like Prius V.

Nice info mate.

Opening the headlight it's not a problem.

I can replace the d2s with the d5s directly?

I would rather prefer having projectors that reflectors, because it's easy to convert to lhd pattern.

Led projectors? Sounds nice. Do you have other infos about that?

Yeah, replacing projectors isn't a big thing, usually easier than working with reflectors. I have no idea what sizes/shapes the D5/6/7/8 projectors come in, too new for me :P.

LED projectors are another thing you can try, if you can find. I recommend the Koito bi-LED, such as found in Prius V, and other cars like Murano. You'd have to look at wreckers/junk yards and second hand parts places like that. With LED you can usually wire them up easily and not worry about bulbs.

I actually have a bunch coming from Japan, so will see how they go in R32 headlights :D

I'd probably be easier to find 25W HID projectors and fit them into your current headlights. This will require lots of work so I recommend getting a second pair of headlights (doesn't have to be Series 3 HID ones).

But yeah, let us know what you find.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
×
×
  • Create New...