Jump to content
SAU Community

Te37 fitment

smidy

By smidy,
in Exterior & Interior Styling

 Share

Recommended Posts

smidy Community Regular

smidy

Posted
  • Author
Posted
Smidy if you end up fitting these wheels without spacers, can you report back whether they foul the struts or scrub. Would be much appreciated and helpful for others.


No prob man will get the tyre fitters to let me know as they will be doing it as need a balance and wheel alignment when done to. Only thing is mine being a gtr and yours a gts-t you said there maybe a difference in guard dimensions and wheel allowance but will let you know anyway.
  • 2 weeks later...
smidy Community Regular

smidy

Posted
  • Author
Posted
Cheers man.
Atm I'm running stock wheels and have a ridiculous 5cm of guard gap each corner, those spec wheels should fit but just not sure about suspension clearances.


So got the 18x9.5 te37 fitted to my gtr. Didn't even need spacers at the end of the day, rims sat perfect just inside guards and filled it in nice. How it goes on a gtst not sure though. Have the 25mm spacers for sale if needed anyway, t6061 billet aluminium 5x114.3- 5x114.3 stud pattern.
IMG_2351.JPGIMG_2349.JPGIMG_2348.JPG
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Butters
      R34 GTR Speedo Drive , sensor type ?

      By Butters · Posted

      Working through possible solutions of converting my mechanical speedo.    Anyone know what type of speedo sensor the factory r34 gtr getrag has ? what the output is ? I assume its not a VSS and more a voltage like earlier speedo sensors ? Can an ECU read it ?  
    • Duncan
      spot the stagea

      By Duncan · Posted

      roof rail delete used to be a thing, they were made locally for a while too
    • AnimalGarage
      spot the stagea

      By AnimalGarage · Posted

      I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • AnimalGarage
      Can you mount the ATTESA pump in other locations?

      By AnimalGarage · Posted

      According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • joshuaho96
      R34 25GT Engine Light 21

      By joshuaho96 · Posted

      It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
×
×
  • Create New...