Jump to content
SAU Community

Recommended Posts

R33 GTR Track Car
After lots of thought, I am looking at selling my R33 GTR track car.
Will be very hard to find another car built to this standard. Car has been built and maintained by Ray Evans and Racepace Motorsport.
 
This car has had very little use, only half a dozen track days with oil changed after each. 
 
Listed below are specs of the car, I have most probably missed a few....
 
Made 403kw at 19psi on 98 fuel. Is ready to be converted to E85. Only needs the time as everything has already been done. 
 
Car
QM1 White Series 3 R33 GTR
Full respray in and out including engine bay (windows out)
 
Engine
Nitto 2.7 Stroker Kit
Group A cams
Ferrea Oversized Valves
Head has been extensively ported
Darton Sleeved Block
Dry Sump Setup, boot mounted
New Gasket Kit
New Welsh Plugs
Cometic Head Gasket
ARP Head Studs
ARP Rod Bolts
N1 Water Pump
Nitto Oil Pump
ATI balancer
Rebuilt Front Diff
Braided lines throughout using Speedflow and Aeroflow fittings (All are Black)
GREX Oil Filter Relocation Kit
Setrab Oil Cooler, mounted behind passenger side bumper air vent
Custom front and rear oil catch/breather cans for dry sump set up
Adjustable cam gears
 
Intake and Exhaust
Tomei 3.5” Titanium Exhaust
Plazmaman Comp Series 100mm intercooler
Turbosmart 60mm Power Gate wastegate (Black)
Turbosmart Race Port Blow Off Valve (Black)
Custom 3.5” front pipe HPC Painted Black
Custom intercooler piping
Custom 4” pod filter to turbo
Custom turbo heat shield
 
 Cooling
Auto Select carbon cooling panel
Koyo Radiator
Nismo thermostat
 
Drive Train
OS Giken Gear Set 1-5
NPC Twin Plate Clutch
 
Turbo, ECU and Fuel
GTX35 turbo with 1.06 exhaust coated HPC Painted Black (rear housing)
6Boost turbo manifold coated HPC Painted Black
Turbosmart Race Port blow off valve
Twin Bosch 044 external pumps mounted in boot plus in tank fuel pump
Fuel surge tank mounted in boot
1000cc injectors (E85 compatible)
Greddy twin feed fuel rail
Turbosmart fuel pressure regulator
Haltech Platinum Pro ECU
Splitfire coil packs
Brand new Genuine Nissan Series 3 GTR engine wiring and coil pack looms
 
Exterior
Genuine Nissan Rear bar pods
Nismo front splitter
Sebing Carbon fibre vented bonnet (Z-Tune)
Auto Select front cannards
Nismo pillar garnishes
Nismo spoiler end caps
Nismo clear side indicators
 
Interior
CAMS Approved 6-point comprehensive roll cage built by Meridian Motorsport (Track Art)
Custom floor plates
Custom door trims
Custom Rear firewall paneling
Flocked dash and centre console
Interior completely stripped including sound deadener
Whole interior painted in 2 pac white
Velo Apex driver seat
Velo GP90 passenger seat
Velo harness’s
Defi Advance CR Black face gauges including Boost, Oil temperature, Oil pressure and Water temperature
Trust Profec B boost controller
Sparco suede steering wheel
OMP quick release steering wheel hub
 
Wheels/Brakes/Suspension
Race Pace Modified Tein RA coilovers
Ikeya Formula suspension arms (the whole kit)
Whiteline adjustable sway bars (front and rear)
Rays TE37 10x10.5 +15 wheels with RE55 295/30/18 semi slick tyres
Cusco Hicas lock bar
Cusco brake cylinder stopper
 
For any further info, please send my a message via PM with your contact number and I will call to discuss. 
 
To build this car, you are looking at well over $100k
 
Asking price is $60,000
  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/471295-r33-gtr-track-car/
Share on other sites

  • 2 months later...
  • 1 month later...

Back on the market. 

Buyer fell through due to financial reasons. 

Forgot to add that the car has AP Racing brakes front and rear, 6 pot and 4 pot.  Also has AWD controller. 

Hey Steve

Love your car - I have been looking at this for weeks - timing not right for me otherwise I would be very interested.

Good luck with it - amazing car priced very very well. 

  • 3 months later...
  • 4 weeks later...
  • 2 months later...
  • 4 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...