Jump to content
SAU Community

For Sale: 1995 R33 GTS-t 425rwkw

Niall_J
 Share

Recommended Posts

Niall_J Newbie

Niall_J

Posted
Posted

Hi everyone,

Apologies for my first post being a sale.

Selling my 1995 Series 1.5 R33 GTS-t

Located in Canberra

Price: $23,000 - open to reasonable offers

Currently serviced and tuned by Autotech in Hume. I've owned the car since December 2014 but I need something a little bit more practical. It's never been tracked, only used as a part-time daily driver and weekend cruiser. Car has a fully engineered RB25/30 with slightly under 30,000km's on it ( engineering paperwork will be supplied to the buyer). Currently makes 425rwkw on United E85 @25psi. Car has a flex-fuel sensor and can run any combination of E85/98. Car also has a boost controller so you can run either 14psi (wastegate pressure) or 25psi (car makes 323rwkw on 98 @14psi).

The body of the car has done approximately 161,000kms and is in great condition for a car that is 22 years old. Car is clean, always garaged, washed every week and is serviced regularly, with only a couple of minor imperfections (including a small stone chip on the front bumper that was on the car when I purchased it in 2014). The inside of the car is clean and in good condition. Pictures of the car can be found at https://www.carsales.com.au/private/details/Nissan-Skyline-1995/SSE-AD-4709888/?Cr=0 

Modifications are as follows:

RB25 head (ported and polished)

Greddy intake manifold

Camtech 274deg camshafts

Tomei adjustable cam gears

Tomei solid lifters

Performance heavy duty valve springs

Spitfire coilpacks

ARP Head Studs

 

RB30 block

CP forged pistons

Nitto H-beam conrods

Ross harmonic balancer

ARP Main Studs

 

Garret GT3582R

6Boost steampipe top mount manifold

Turbosmart pro gate 60mm wastegate (plumbed in) with 14psi spring

Turbosmart Plumback blow off valve

Hypertune 90mm throttlebody

Front-mount intercooler with custom piping

3inch turbo-back high-flow exhaust

Magnaflow dual tip rear muffler

 

Walbro 460lph in-tank fuel pump

Custom made surge tank (under car)

2x Bosch 044 fuel pumps (under car)

Turbosmart adjustable fuel pressure regulator with gauge

GReddy dual feed fuel rail

ID1300cc fuel injectors

Braided lines throughout

 

Haltech Platinum Pro ECU

Haltech flex-fuel sensor

Haltech I/O Expander Box

3 bar map sensor

O2 wideband sensor

Mongoose 3-point car immobiliser and alarm

 

Rebuilt standard gearbox

Mantic custom built twin-plate clutch

Lightened flywheel

Short shifter

 

Bilstein shocks (adjustable)

King springs

Whiteline adjustable sway bars

Full front and rear suspension rebush

Hicas lockout bar

 

Rays Volk GT-7's (originally chrome, but inside piece has been plasti-dipped in dark grey)

Bridgestone Potenza RE003's (265/35/18 rear, 235/45/18 front)

DBA4000 rotors

Bendix ultimate brake pads

 

Car is registered in the ACT until December 2017 and can be supplied with (+$500) or without RWC. Serious buyers only. No swaps. I'm happy to take potential buyers for a drive, but I won't be offering test drives. If you want any more information about the car, I'm more than happy to help. Thanks

Link to comment
https://www.sau.com.au/forums/topic/472391-for-sale-1995-r33-gts-t-425rwkw/
Share on other sites
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • brillo
      Leak from Tokico BM50 Brake Master Cylinder

      By brillo · Posted

      Sorry to hear your HFM BM57 was faulty,  did you contact HFM I would hope they would be at least grateful for the information if there was some sort of manufacturing fault, you would hope they would be sympathetic even if your item was 2 years old if it had never been fitted. May I ask where it leaked from ?
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Cats are called Bella, and Donna...  Like that poisonous plant And I remember your 2 monsters, I remember making a little bit of wee when you let them out... LOL I have already installed cat doors into the laundry where their kitty litter is, and the sun room, apart from the cat doors there's not going to be any permanent mounted stuff on the interior walls (interior doors are cheap and easy to replace) I will get a outdoor cat cage thingie once I finish the landscaping out back... https://catnip.com.au/ The only off limit areas are the main bedroom and the gym room....but, currently the cats are curled up in bed, in the main bedroom with the Mrs.....LOL, the off limits for the kittens to the main bedroom lasted about 5 minutes with Jackie I currently only have 1 free standing huge cat tree multiple level scratching post thingie in the lounge room, but, I will be getting another one soon now that I'm happy with the furniture layout in the back room and have a perfect spot for it  
    • joshuaho96
      UniClutch

      By joshuaho96 · Posted

      All of this is making it seem clear that running the Coppermix twin was definitely the way to go, especially in hindsight with how insane tariffs have gotten and the strength of the USD vs yen at the time.
    • MBS206
      Who has a Infiniti Q60, Q50 (V37)?

      By MBS206 · Posted

      That sounds like no chance of even importing one for road registering then Now I see why Duncan wants to check LHD rules for Targa...   I wonder how "bolt in" the AWD would be if you got one imported from the US and swapped it to an AUD one
    • Piggaz
      UniClutch

      By Piggaz · Posted

      Not to mention they drive like a bucket of bolts! yuck!
×
×
  • Create New...