Jump to content
SAU Community

Recommended Posts

Im currently with HBF on my GTSt and they are really good (and more importantly, cheap), got a quote for a GTR insured for $40000 is only around the $2G mark.

Anyhow, thats not the problem, because i imported my car it requires an evaluation done by a guy the insurance company recommended, i explained to this guy how the car was an N1 and how limited numbers were made blah blah... anyhow he reckons $30G to maybe $35G?

Reckons once i get it registered it may go up to $38 depending what i do to it. The exhaust system alone is worth probably up near $6G! Anyhow enough whinging, anyone had any experience with this and know how to get the evaluation amount higher? Theres no point insuring it for $40-45 if i total it or it gets stolen and the company turns around and says... ah we only evaluated that car at $30G.

You serious? Cause the plan is to fit a Power FC. It doesn't matter much as i'll be over east in a couple of months and HBF wont insure you over there so will have to change policies. I sent a quote to Just Cars telling them the deal, see what they offer regarding insurance

Hey, well it hasn't gotten to HBF yet, still waiting to get the car finished, may have issues with the modifications. Just got a quote from just cars, they're actually cheaper, $1700 to insure for $40000. I'd probably up that amount to say $55000 if they're going to include the mods. ANyhow the excess is the thing. Standard: $300 Under 25: $300, Policy excess: $1000, mags: $700, Mods: $400, Theft: $1000. Means if my rims and tyres were stolen (value $5000 max), then i'm up for $3700 in excesses plus take a hit for my NCB.. i might give them a call and get some more info

hahaha HBF dont have a company they recommend as they cant do that cos they arent affiliated with any car valuers.. so whoever you were talking to has sent you on a goose chase.. WE DO NOT RECOMMEND ANYONE AS A COMPANY... personal recommendations on the other hand are fair enuff.

go to somewhere that imports them and get a valuation from them, like C-red or Extreme Machines or Autoworx etc.

get them to do a full value.. you will find your premium wont go up by much at all for the higher sum insured..

also be very careful when dodging insurance in parents names etc. or anything along those lines.. had a few dodgies already and you gotta be careful when claiming

better not to dodge at all.

anyways go get a valuation from someone WHO KNOWS WHAT THESE CARS ARE WORTH PARTICULARLY A GTR N1

how did you get ones of these anyways.. good catch

Hey Riaz,

Yeah ive decided to give HBF the arse, they recommended a bloke to do the evaluation, he didn't really have an idea even when i explained about it being a limited edition version of the GTR ($30-35G).

As for dodging them up the whole thing is legit. I have a 60%NCB and its all in my name, when i first was after an import a few years back the insurance place said to get my own bonus up as they said that those cars (skylines, zx's etc) were flagged and the accidents investigated.

As for getting the N1, was browsing the japanese auctions for about 4 months looking for a grade 4 or better GTR V-spec in black with a few "compliance friendly" mods when an N1 popped up, few phone calls and i put the bid in but didn't expect to get it, in the end got it for less than some of the standard v-specs i'd been bidding on. Whats better is it turns up with a huge stainless turbo back exhaust, stainless manifold, HID lights and a few other goodies that weren't on the auction sheet, made getting it complied more tricky though.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • (it is a brand new ported mellings pump) I suspect the lack of pressure is due to the leak. It was *not* that low in other logs of oil pressure in the past. It wasn't that hot either, but not far off.
    • Would a Mellings oil pump be a viable option  From my time with a LS, and talking to tuners and LS specialists, the "weak" OEM oil pump is one of the first things they recommend to swap out if I was going to give the engine any high RPM I opted for a Mellings high volume, with the high pressure springs and I never had a issue with it Cost wise they are not expensive in the scheme of things 
    • Just bought a 2002 Stagea 250tRS VR-X Four AERO VQ25DET and spent the last two weekends cleaning and detailing it.. still have to do the wheels and the engine bay but the rest of it came up nice. Imported 2011 to S.A. and I'm the third owner since it was imported. I met the guy who brought it over, he went to Japan and picked out the car, bought it and ordered the wheels. He also gave me a list of stuff he did to the car with receipts. Coil overs (I have the original springs), 3" exhaust from the dump pipe back no cat, Custom dump pipe,(I have the original exhaust), Plenum spacer, 18" custom Work XSA wheels (need restoring, I've made a start..), Shift kit put through the 5 speed tiptronic auto, TV and menus/screens changed to english, Australian DTV tuner installed in rear. I've just had four new discs and new pads as well as all the fluids including the brake fluid replaced. I have all the receipts for the last 15 years and the import papers in a nice folder. Car looks great, goes like hell but fuel economy is not a thing lol.. pics next..
    • I ended up in this rut again lol, and used a shit ton of filler. One thing I can't understand is, even after using a big long block and going in long X pattern strokes, I always end up at bare metal again with no filler, and my repair started at one end of the door and now I've chased my tail to almost the other end of the door. I was thinking of hitting the panel with a hammer where it might be a high spot and making everything low then filling it, I did this on a small section on my other door by mistake and I think I fixed it lol. Is this a bad idea? The other thing is with guidecoat, whether it's the powder or spray, after I sand all the guide coat off, it doesn't reveal anything for me in terms of high spots and low spots and makes it especially hard when it's bare metal (at least in powdered form), am I doing something wrong here, or likely a high spot I keep going over and creating valleys? Lastly, stupid question but, is it possible that after sanding if I only sand over the filler area where I know to be a dent that it's impossible for me to dig into that dent? Unless there are other problems which I missed.  
×
×
  • Create New...