Jump to content
SAU Community

Recommended Posts

So the time has come to sell my baby. I've owned the car for 8 years and it literally has been my dream car since i can remember, however with a young family i dont have any time to enjoy the car. So the time has come. Its never been tracked (as much as i would have liked to) only daily driving. No rips or collapsing of seats and interior is in great condition.

Registered till 05/02/18
R33 N1 engine (long motor supplied by JustJap, was a display engine)
Car has 54800 kms on the nismo dash. Cant confirm original kms, however the car only had done 4000km in 2 years by previous owner. Engine was done at 45200km in 2010 by the boys at Gavin Wood Autotech on the Gold Coast.
Serviced by every 5000km or 12 month's
Always serviced with Motul Turbo light 10w-40
Shockproof gear oil
Liquimoly diff oils
R33 N1 engine
Apexi powerfc el
Hks evc boost controller
Tomei poncams inlet and exhaust
JJR adjustable cam gears
2860-7 turbos
Apexi intake system
Z32 afm's
Walbro in tank pump
700cc sard injectors
Nismo FPR
Splitfire coilpacks
Nismo super coppermix clutch
HKS coilovers
Project MU slotted rotors
18 x 10.5 BBS wheels gold
Falken 265/45r18 tyres 80%-90% tread
HKS turbo back exhaust
Oil cooler
Jun carbon front lip

Made 420hp atw on 98 @ 18psi
Perfect street car

Car has a few TLC things. However, mechanically its in excellent condition.

* EL hand controller display not working. Can buy replacement controllers. Its not affecting the tune.
* few little stone chips in bonnet. Typical daily driving stuff
* boot floor spare wheel cover missing
* scratches in paint on drivers side window switch panel.

Asking $38000 ono
Plates not included
Located in Gladstone Queensland
PM contact preferred

2014-07-02 13.31.54.jpg

Matt & Hayley Wedding 191013 206.JPG

IMG_6702.JPG

post-72119-1350123397669749611.jpg

20170827_171745.jpg

20170827_164432.jpg

20170827_165105.jpg

20170827_164802.jpg

20170827_165202.jpg

20170308_054918.jpg

20170308_055043.jpg

  • Like 2
  • 3 weeks later...
  • 4 weeks later...
  • 3 weeks later...
  • 2 weeks later...
On ‎21‎/‎10‎/‎2017 at 8:02 PM, nismo z-tune said:

Car has a few TLC things. However, mechanically its in excellent condition.

* EL hand controller display not working. Can buy replacement controllers. Its not affecting the tune.
* few little stone chips in bonnet. Typical daily driving stuff
* boot floor spare wheel cover missing
* scratches in paint on drivers side window switch panel.

UPDATE!!

Brand New EL hand controller in :1311_thumbsup_tone2:

New stronger boot floor in:1311_thumbsup_tone2:

painting interior trim in flat black to match stock during the week to fix scratched paint

Cheers Matt

  • Like 1
  • 1 month later...
  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I know why it happened and I’m embarrassed to say but I was testing the polarity of one of the led bulb to see which side was positive with a 12v battery and that’s when it decided to fry hoping I didn’t damage anything else
    • I came here to note that is a zener diode too base on the info there. Based on that, I'd also be suspicious that replacing it, and it's likely to do the same. A lot of use cases will see it used as either voltage protection, or to create a cheap but relatively stable fixed voltage supply. That would mean it has seen more voltage than it should, and has gone into voltage melt down. If there is something else in the circuit dumping out higher than it should voltages, that needs to be found too. It's quite likely they're trying to use the Zener to limit the voltage that is hitting through to the transistor beside it, so what ever goes to the zener is likely a signal, and they're using the transistor in that circuit to amplify it. Especially as it seems they've also got a capacitor across the zener. Looks like there is meant to be something "noisy" to that zener, and what ever it was, had a melt down. Looking at that picture, it also looks like there's some solder joints that really need redoing, and it might be worth having the whole board properly inspected.  Unfortunately, without being able to stick a multimeter on it, and start tracing it all out, I'm pretty much at a loss now to help. I don't even believe I have a climate control board from an R33 around here to pull apart and see if any of the circuit appears similar to give some ideas.
    • Nah - but you won't find anything on dismantling the seats in any such thing anyway.
    • Could be. Could also be that they sit around broken more. To be fair, you almost never see one driving around. I see more R chassis GTRs than the Renault ones.
    • Yeah. Nah. This is why I said My bold for my double emphasis. We're not talking about cars tuned to the edge of det here. We're talking about normal cars. Flame propagation speed and the amount of energy required to ignite the fuel are not significant factors when running at 1500-4000 rpm, and medium to light loads, like nearly every car on the road (except twin cab utes which are driven at 6k and 100% load all the time). There is no shortage of ignition energy available in any petrol engine. If there was, we'd all be in deep shit. The calorific value, on a volume basis, is significantly different, between 98 and 91, and that turns up immediately in consumption numbers. You can see the signal easily if you control for the other variables well enough, and/or collect enough stats. As to not seeing any benefit - we had a couple of EF and EL Falcons in the company fleet back in the late 90s and early 2000s. The EEC IV ECU in those things was particularly good at adding in timing as soon as knock headroom improved, which typically came from putting in some 95 or 98. The responsiveness and power improved noticeably, and the fuel consumption dropped considerably, just from going to 95. Less delta from there to 98 - almost not noticeable, compared to the big differences seen between 91 and 95. Way back in the day, when supermarkets first started selling fuel from their own stations, I did thousands of km in FNQ in a small Toyota. I can't remember if it was a Starlet or an early Yaris. Anyway - the supermarket servos were bringing in cheap fuel from Indonesia, and the other servos were still using locally refined gear. The fuel consumption was typically at least 5%, often as much as 8% worse on the Indo shit, presumably because they had a lot more oxygenated component in the brew, and were probably barely meeting the octane spec. Around the same time or maybe a bit later (like 25 years ago), I could tell the difference between Shell 98 and BP 98, and typically preferred to only use Shell then because the Skyline ran so much better on it. Years later I found the realtionship between them had swapped, as a consequence of yet more refinery closures. So I've only used BP 98 since. Although, I must say that I could not fault the odd tank of United 98 that I've run. It's probably the same stuff. It is also very important to remember that these findings are often dependent on region. With most of the refineries in Oz now dead, there's less variability in local stuff, and he majority of our fuels are not even refined here any more anyway. It probably depends more on which SE Asian refinery is currently cheapest to operate.
×
×
  • Create New...