Jump to content
SAU Community

Recommended Posts

well accord to nismo the original balancer (12303-05U01) is no longer available, but they are making a replacement 12303-RHR20 for a very reasonable 42000 yen.

http://www.nismo.co.jp/heritage_parts/

bolt is 12309-05u00 and big washer under it is 12308-05U00

  • Thanks 1

I'm pretty sure Vspec  had the same crank as base GTRs. They all changed sometime around 94 to long drive for the oil pump but that was not Vspec only, and they are interchangable. Does your 93 have a long oil pump drive?

I can double check if the crank is different if you want, either post or pm me your VIN number.  The crank part number for my 91 non vspec 32 gtr is 12200-05U01. FAST shows 12200-05U02 and 12200-05U03 are alternate part numbers (ie interchangeable) but there is no description of the the change.

In any case, the long oil pump drive does not change any of the parts around. It just engages more of the oil pump rotor.

  • Thanks 1

Yeah that's the number. Australia adds a whole bunch of stuff to the front but BNR32-303809 is your japanese VIN. It comes up with 12200-05U02 for the crank so it is different to my earlier car, but not necessarily because it's a Vspec.  As I said earlier 12200-05U03 superseeds both of them so whatever the difference is they are all compatible.

In any case...the part numbers I posted above for the balancer, bolt and washer should be fine. What happened that you need them?

  • Thanks 1

Personally I wouldn't hesitate to reuse the bolt and washer, I've reused them many times. Seems like a good idea to replace the balancer as they have bonded rubber and would be feeling their age by now.

When you do the timing belt you should definitely change the stud for the timing belt idler bearing, they have been known to break, as well as the idler and tensioner bearing of course. And the cam and crank oil seals. And the water pump.

 

  • Thanks 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • If you mean the alarm immobiliser; theyre internal to the alarm itself which makes that difficult; I couldnt even see where he put it; its not in the same place as last time; but with all black wiring it might be very challenging to trace  I had someone turn the key for me as I know it only primes for a couple of seconds As my post above; I am getting no voltage to the pump at all; but I am testing continuity of the power line (SB) from the pump plug to the relay fine. As well as the negative from the pump plug to a 12V constant.    Yeah; he blammed the no start on a bad battery; said I needed to get a new battery and it'll start. Turns out the battery drained because the tail lights had been on for half the day during the install (the rubber cushion on the brake switch gave out while he was testing it as I have a picture of the car from that morning with the tail lights off..i've replaced that). The battery was turning over the engine just fine for a long time; but got low since lights were draining it so it was too low to test a start after he finished. I bought a new one on his advice...$250 wasted. My original battery charged up just fine and is healthy.    It was running perfectly fine when I messed up the old alarm (programmed out the remotes). He couldnt start it after removing the old alarm; my assumption is that when he unhooked it; he didnt bridge the circuit back when trying to start it. Its always been perfectly fine. The ECU swap and pump were 2 years ago. It's never missed a beat in that time. 
    • This is a big issue for me without the diff. I just have zero drive from the passenger side when drivers side has no traction. Bec's parents place has a crazy steep driveway with odd camber and I have never been able to get up. My bro-in-law's 130i with an (unknown brand) LSD gets up fine as does their dad's Hiace. My car stays at the bottom. We have other odd camber roads around here as we're elevated a bit and if it's raining I can get totally stuck around some hairpins. 
    • Yeah, I am super excited for this.
    • Was the car running before he touched the car?
×
×
  • Create New...