Jump to content
SAU Community

Recommended Posts

Ok so I'm a little bit unsure which path to go with my new build this year... I'm building a 25/30 and looking at GTX42/PTE6870g2/EFR9180 and not sure if I should keep VCT and run 268 9mm or get rid of VCT and run 272 10.4mm. I'll be tuning getting it tuned on my manual box then moving to a glide setup as most stuff I do is mexican highway/drags/roll racing. I still want somewhat of a powerband, will probably only rev it to 8k to stay on the safe side for the hydraulic lifters.

Positives and negatives to both, if i delete vct I'll have to clearance head for big lift, but I won't have to do an external vct oil feed, laggier.

If i keep it gotta run external feed, smaller duration and lift but bring the turbo on quicker? 

Head will be ported with +1mm valves also.

Also those of you who run ross balancers, is the metal jacket ok or should I upgrade to the race series? (A/C retrofit is exy). They rate the metal jacket to 600hp which ill be exceeding but just wanted to see what people are running. Open to other options as well if any.

Link to comment
https://www.sau.com.au/forums/topic/473060-rb2530-big-hp-vct/
Share on other sites

10 minutes ago, sneakey pete said:

Power ratings on balancers is one of the most stupid things ever in my opinion.

Also, is 268x9 really the biggest VCT cam you can get?

I don't understand them haha people make 600whp on stock balancer but their aftermarket 'upgraded' unit is rated to 600hp? 

What do you run on yours Pete? 

Yup, as far as I'm aware anyway. Im gonna shoot kelford an email and see what they say about a custom vct set.

VCT is awesome, but on an auto making 600kw would want more lift than 9mm, and for actual driving under the pump bigger duration with a lot more lift would be the go. Best is best of both worlds, similar specs with VCT!

57 minutes ago, klutched said:

I don't understand them haha people make 600whp on stock balancer but their aftermarket 'upgraded' unit is rated to 600hp? 

What do you run on yours Pete? 

Yup, as far as I'm aware anyway. Im gonna shoot kelford an email and see what they say about a custom vct set.

Got a ati... 1000 or 800 or whatever the higher spec one is. AC works which is a benefit however its overdriven 33% so need to be careful about it being on or off. Do wonder if i could have gone for the smaller one, on the other hand i'd like to be able to rev it to 9000 for when i'm feeling stupid, and doing launches etc sometimes and I expect that is where it would be a more critical difference.

cams wise, no VCT on the 26 head unfortunately, but I have unigroup 260x11mm cams which seem to be pretty amazing.

I have emailed kelford to ask if it's possible to run more lift with VCT and what they'd recommend for my setup. 

Yeah small lift and relatively low duration for the turbo size I want to run, little worried 268 wont bring out the full potential up top.

Oh yep, shame ATI dont make a balancer for the 25's.... Ross is the only way to go for me I think.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...