Jump to content
SAU Community

Recommended Posts

logo-small.png

ultraracing.jpg
Moonlight Racing is happy to announce we are now a dealer for Ultra Racing suspension components. Ultra Racing was founded in Malaysia back in 2002 with the aim of improving chassis handling and safety through an ever expanding range of strut bars, anti-roll bars, lower bars, fender bars and more.

Nissan-Skyline-GT-R-33-4WD-Front-Strut-B
From the very first day Ultra Racing have strived to offer the very best in chassis tuning and safety with a focus on extensive research and development both in house and on track. The Ultra Racing range of chassis products are used in many different motorsport classes throughout the world including Drifting, Time Attack and Circuit Racing.

Contact us today to see what we can do for you! Just message us on here to order or for any enquiries. Remember, we have FREE shipping nationwide!

  • Like 1
  • 2 months later...

We made a mistake! Our Ultra Racing pricing was all wrong on the website.. it's now been fixed up to the best pricing in Australia!

As an apology, we've knocked a further 5% off until end of this weekend so be sure to get your orders in. Afterpay is available and free shipping nationwide.

Buy now and save with Moonlight Racing Australia - www.moonlightracing.com.au! Just add to cart for discount to apply.

  • 2 weeks later...
18 hours ago, simpletool said:

I've look a few times and it would appear there is no front fender braces for R33.  Pity. 

True.. they have about every other kind but not that one T_T

On 5/29/2018 at 4:43 PM, simpletool said:

I've look a few times and it would appear there is no front fender braces for R33.  Pity. 

I’ve had a few looks myself. There is the odd site that looks like they supply them but it appears they get 33s and 34s mixed up. As they list them to fit 33 GTTs for example. 

  • Like 1


  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...