Jump to content
SAU Community

Recommended Posts

Hi all

 

Can someone shed some light on why people converting an RB26 from twins to a single tend to lean towards the Garrett GTX range instead of the Garrett GTW range?

 

There is hardly any reviews on the GTW series because on one seems to use them...

They certainly seem to have the goods :)

 

So why? [emoji848]

Link to comment
https://www.sau.com.au/forums/topic/473908-garrett-gtw-series-turbos/
Share on other sites

The GTW range is the budget performance series, they are effectively revamped Garrett T-series turbos with "GTW" compressor wheels replacing the old compressors.  They go well enough but are pretty much Garretts equivalent to the Precision and FP turbos which were available 8 years ago.

Edited by Lithium

Its all the unforseen stuff. Ceramic coating, underestimating the cost of lines/fittings/heat proofing shit. V band here and there, adds up lol i had to pay retail for my fab work. I dont weld. I got a good deal but thats the only labour i paid for.

Fair enough! Like most things you jump into it and realise there’s more too it lol
I said to my tuner I’m looking at a budget single turbo conversion, all he said was
“Remove the word budget and re send message”
Hahaha
I got the hint lol

3 hours ago, JDM33R said:

Fair enough! Like most things you jump into it and realise there’s more too it lol
I said to my tuner I’m looking at a budget single turbo conversion, all he said was
“Remove the word budget and re send message”
Hahaha
I got the hint lol

F oath bro lol.

Dont buy someone old bullshit turbo kit. Not worth the hassle.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...