Jump to content
SAU Community

Brisbane Motor Imports

heartless

By heartless,
in Queensland

 Share

Recommended Posts

heartless Apprentice

heartless

Posted
Posted

Hey guys I'm looking at ordering a replacement engine from these guys and I've heard a few good things and a few bad things about them (The bad things were quite a while ago and i imagine they'd of cleaned their act up if they wanna stay in business)

I'm looking at $2,200 For the Engine and $200 for Freight to the Mechanic in NSW i was told its been compression tested and has 175 across all cylinders and 94,000 km/s on it

its a RB25DET S2 out of a Stagea and they said it comes with Start-Up Warranty (If it makes any strange noises once its dropped in  or is down on compression i can send it back for a full refund.)

 

Just wondering if any of you have any recent experiences with them and if so are they good/bad experiences Thanks in Advance

http://www.brisbanemotorimports.com.au/

Link to comment
Share on other sites
heartless Apprentice

heartless

Posted
  • Author
Posted

Just an update if anyone things thinking about using them I would recommend it they sent the engine out the same day and gave me a tracking code will let you know if all is well when it arrives tomorrow

Link to comment
Share on other sites
Burger Grand Master

Burger

Posted
Posted

Yeah start-up warranty is usually the norm because they don't know if you're about to put 50psi into it and blow it up or not

I've bought once from them before and had no problems.

Link to comment
Share on other sites
  • 2 months later...
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • funkymonkey
      R32 Nostalgia

      By funkymonkey · Posted

      OK so I just bidded $500 on an R33 GTS4 that no one seems to want. Waiting on a call from the agent to see if I won. 32 GTS4 is for sale. I can't deal with the temptation to mod it.
    • funkymonkey
      Japan Scrapbook

      By funkymonkey · Posted

      Might be there for work later in the year. Wouldn't mind catching up with you fellas - can't have too many beers, but will consume copious amounts of takoyaki while executing an asian squat on the side of the road while you blokes sort out your hangovers.
    • Duncan
      Never ending fuel pump drama

      By Duncan · Posted

      I know one example is a anecdote not data, but I'm running the same Aeroflow 525 at full voltage through a regular relay, and while I've had other fuel problems including melting the factory fuel hat, the pump itself has been fine for years. Of course, they aren't *that* expensive these days, you could swap in a new one and see if the issue is resolve. I think you had a previous thread about fuel problems, have you been monitoring and logging fuel pressure? Is there anything voltage related (for example does the voltage go up when the pressure goes down)
    • Dose Pipe Sutututu
      Never ending fuel pump drama

      By Dose Pipe Sutututu · Posted

      Slap a 460L into the car, send its mum.  
    • Murray_Calavera
      Never ending fuel pump drama

      By Murray_Calavera · Posted

      So last night pulling away from the lights, I lost power for about 1 second. Bit weird, but I kept driving... 5 minutes later the pump completely dies. When I tried to start the car, the pump won't even prime.  I left the car for about an hour, tried to start it and it all appeared fine. Pump primed, car started, got the fuel pressure I should have.... Start driving home, 5 minutes later it dies again. I'm stuck in a shit spot this time going up hill with a car right behind me, so I just let the car continue to turn over while praying to the fuel pump gods. After about 2 minutes of turning the engine over, the fuel pump came back to life and I got home (only about another 5 min away).  So I've been digging around online, it seems like the 525 fuel pumps really don't like to be run at 100% all the time. I've found quite a few examples online of people killing their Walbro 525 pumps within about a year of usage when they are run without PWM.  So, my pump is an Aeroflow 525 (AF49-1057) and I've been running it at 100% without PWM. I'm thinking the Aeroflow 525 didn't like being run at 100% and has burnt itself up.  I really am sick of dealing with fuel pump issues, my current thoughts are -  1. Use a Walbro 450 and run it without PWM. It seems like these pumps hold up pretty well to being run at 100% all the time. I only make about 350kw and can't see me making any more power any time soon so this is probably a fine option.  2. Get a Walbro 525, run it with PWM. I know doing this will annoy me as I feel like with only 350kw, its extra expense that I don't "need" and I'll be thinking the whole time while setting it up that I should have gone with option 1. I know I'll be happy with this option when its setup and running, its only the initial setup frustration and cost as an issue.  3. Get a Walbro BKS1001 brushless pump. This is the fu*k it I'm already going PWM, might as well go full retard. This option just seems better in every way, with the only downside being cost. But I don't know much about this pump so I could be wrong.  Happy to get everyone's thoughts before I go digging around in the fuel tank again. 
×
×
  • Create New...